Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lost your ARN password?

Password Reset on Nortel ARN

Lost your ARN password?

by  campyracr  Posted    (Edited  )
PASSWORD RECOVERY FOR ARN
=========================================================

[color blue]If a customer forgot his Manager password for the ARN, perform the following to blank the password.[/color]
1. Power Cycle the ARN.
2. When the ARN starts cycling through Power on Diags,

Type Cntl C followed by a carriage return. This will put you in diagnostics mode and you will see the following prompt.
diag_1>>
3. At this prompt, type in the following command exactly as is:

d/l/n:5 410000 0
[color red][D/L/N:5 41(4 zeros space zero)][/color]

This sequence will blank out the Manager password in NVRAM.

4. Type boot or power cycle the ARN and off you go. There is no longer a Manager password.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top