Verify if read/write network connection exists between the FOH terminals and the file server's BOOTDRV share exists.
1. Create a txt file from the server on the terminal's bootdrv share and save it.
2. Create a txt file from the terminal to the servers bootdrv share nd save it.
3.Check the lana number for the network card assigned to Aloha is configured on the BOH.
4.Check the lana number for the network card assigned to Aloha is configured on the terminal.
5. Check the IP address and subnet on the file server and IP and subnet on the FOH terminals are properly configured
6. Verify if the SERVER, IBERROOT, TERMSTR, IBERDIR and variables have the same values on the file server and terminals. Open a dos prompt on the terminal and BOH type in SET then enter. Check the listed variables above.