; Conversion Utility Network Data log.was 27th July 2007 ; How to provide a list of the Meridian "NETWORK" Information as *.CAP etc ; For use with Dave Higham's Conversion Utility.xls program.
; To use this script file, Please make sure that you have access to overlays.. ; LD 86, 87 & 90. You should be logged into the system first!, before this script ie run. ; This script file will collect all of the customer's networking information using ; Customer "0". ; It's best if the TTY that you are using has only "SCH" allowed as it will help to ; prevent any other messages appearing on the log output file. ; I have found it best to check the log file before I use the Conversion Utility.xls Excel ; program. ; This script will start a log file automatically "capture on" when you run this ; compiled file ; If you have more than one customer, Then you can change the "CUST" number to "1" ; etc. ; After this script file has run, Make sure that the "capture off" icon has closed. ; Load up Dave Higham's Conversion Utility.xls file. Click on the "Browse" button & navigate to ; the path that your log file is stored on. Finally click on the "Convert to Excel" ; button & you will get a nice printout (I hope!). ; I would recommend that you keep the captured log file for a while because the ; Conversion Utility.xls program does have one little error & that is it does not show "DMI'S" ; that are listed against "SPN'S" which use's LDID etc. ; You may well find that your Excel list will have many spare "DMI'S" & "RLI'S" etc. ; Do a check on these, before you tidy them up on the Meridian & also save a copy ; of the Conversion Utility.xls file (Just in case a problem occurs after any changes!).