Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here



Helpful commands for 3300ICP by Lundah
Posted: 16 Sep 08 (Edited 10 Jan 13)

Useful 3300ICP commands:

From RTC shell (RS-232 port or puTTY session to port 2002):
ò ps û Shows running process stacks and time they were started
ò ping ô(IP address)ö ,3 û ping from RTC processor to target address
ò arptabShow û displays ARP table (known IP hosts on local network)
ò iPVM_Stop û stops embedded VM
ò iPVM_Start û starts embedded VM
ò bootChange û change bootline parameters
ò reboot û reboots the RTC
ò ShowDspStatus û shows status of DSPÆs
ò mn3300_icp û Shows current running 3300 software release
ò swrevs - Shows current running 3300 software release
ò mipsEnvShow û (MXE only) shows config parameters of MIPS processor for internal L2 switch

Maintenance commands (ôMaintenance Commandsö screen of ESM or Telnet session to RTC IP address)
ò Reset System û restart the 3300 (Rel. 9.0 & up)
ò Swap û swap to inactive partition & reload from that software & database (Rel. 9.0 & up)
ò Show Status Alarms û Shows all active alarms
ò Show Faults Alarms û shows location of faults
ò Show Status DSP û Shows status of DSPÆs (Rel. 9.0 and up)
ò System Totals û Shows total number of trunks & lines configured on system
ò Programmed Reboot Display û shows programmed reboot settings
ò Programmed Reboot Schedule (day) (time) û sets up programmed reboot for desired day/time
ò Programmed Reboot Schedule (on)/(off) û turns on/off scheduled reboot
ò EDT Show Link Status PRI û Shows Layer 1 & Layer 2 stats of PRI on Embedded E1/T1 card, blue/red/yellow alarms on circuit and status of D-channel
ò Message Subsystem û shows status of message links to system components (ASUÆs, NSUÆs, Peripheral Cabinets, etc.)
ò CCS Trace Enable Continuous û turns on CCS (common channel signaling) tracing, displays call data sent/received over IP trunks, MSDN, and PRI links. (Resource intensive, must be disabled when done to avoid an unscheduled reboot of the 3300)
ò CCS Trace Disable û turns off CCS trace.
ò CP Service Day/Night1/Night2/Display û change service mode to Day/Night1/Night2, or displays current mode (Display is Rel. 9.0 and up)
ò Logs Read SMDR All Match [string] û Search SMDR data for any lines with matching criteria. String can be a DN, dialed digits, trunk number, date, or time.
ò Locate Number [string] û Locates number in system, if match exists.
ò Locate Feature Extension [DN] û Displays active features for DN given
ò DGT Trace [string] û traces digit string through ARS and returns routing followed

Back to Mitel Networks solutions FAQ Index
Back to Mitel Networks solutions Forum

My Archive

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close