Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


Steps to Change Out Older DS1 Packs For Newer DS1 Packs by Midstream
Posted: 5 Jun 08

|Print|    display trunk  [Trunk Group Number  - TGN]
|Print|    disp ds1 [DS1 Slot Identifier 1A06-example]
...............printing these out helps recreate them later

Change trunk [TGN]   Remove all ports for the board 1A0601...1A0624

Change sync .....  Remove board from sync source.

Pull board from physical slot

Remove DS1 [DS1 Identifier 1A06]

Change circuit .... Go to cabinet (may need to page forward) and to slot in cabinet and update board type

Add DS1 [DS1 Identifier 1A06]

Insert new board into physical cabinet, add CSU card on back and connect network jack to card and smart jack on the wall

Change trunk [TGN ... add all ports back into the group 1A0601...1A0624]

Change Sync ...  add the board as primary or secondary

Status trunk [TGN ... make sure all ports are in-service/idle or in-service/active]

Refer to the Maintenance Manual and check your printouts if trunks are in any state other than in-service.

Back to Avaya: CM/Aura (Definity) FAQ Index
Back to Avaya: CM/Aura (Definity) Forum

My Archive

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close