Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting the DS30 Bus number - US Systems

Dip Switch Settings

Setting the DS30 Bus number - US Systems

by  senk1s  Posted    (Edited  )
Notes:
a. These specify ONLY the buses (switches 4,5,6)
b. switches 1,2,3 need to be set as well
c. This applies to all MBMs except the FEM
d. Bus 7 is ALSO reserved when using the 3/5 split


Switch # 1 2 3 4 5 6
Bus #
1 Reserved by MSC Reserved by MSC Reserved by MSC

2 ON ON ON

3 ON ON OFF

4 ON OFF ON

5 ON OFF OFF

6 OFF ON ON

7 OFF ON OFF

8 Reserved by MSC Reserved by MSC Reserved by MSC
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top