Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


C-LAN Install/Move in CM 2.0 by PBXTech
Posted: 30 Sep 04

To install a C-LAN in Communication Manager 2.0 and above...

Get static IP address, subnet, data network Gateway, data mod extension, and network name of the new C-LAN board.

+    IP Address         __________________________________________
+    Subnet              __________________________________________
+    Gateway            __________________________________________
+    Data mod ext     __________________________________________
+    C-LAN Name      __________________________________________

  1. Insert new C-LAN into cabinet slot.
  2. Put network amphenol adapter on same slot.
  3. Run æcha node-n ipÆ
          A. Type in C-LAN Network Name and IP
  4. Run æadd ip-in (board location, i.e. 01C12)
          A. Enter the Node Name from the æcha node-n ipÆ screen/C-LAN Name above.
          B.Change Subnet address if necessary.
          C. Enter Gateway address from above.
          D. Do not Enable Ethernet Port yet.
          E. Set Network Region to æ1Æ unless otherwise.
          F. Change Ethernet Options to:
                 I. Auto æNÆ
                II. Speed æ100Æ
               III. Duplex æFullÆ
  5. Do a ædisp com linkÆ
          A. Look for the next unused link and write it down. ______________
  6. Run æadd data nextÆ (or the data mod ext given to you)
          A. Change Type to æethernetÆ
          B. Put in slot and port of C-LAN, i.e. 01A0517 (port 17 for C-LAN)
          C. Put in link from above (ædisp com linkÆ)
          D. Under æNameÆ put in Network name of C-LAN and add æData ModÆ
  7. Plug in network cable.
  8. Run æcha ip-in (board location)
          A. Tab down to æEnable Ethernet PortÆ and set to æYÆ.
  9. Run æsa tÆ to save translations.
10. Run æstatus clan-port XXXXX17Æ
          A. Check for Active Channel 1, Link Status, Service State, and Physical/MAC address.
11. Ping a remote IP.
          A. Run æping ip xxx.xxx.xxx.xxx board (new C-LAN board location).
12. Troubleshoot as necessary.

To move a C-LAN board in Communication Manager 2.0 and above...

1. Run 'cha ip-i (board location i.e. 01a05)' [print this page]
     A. Set 'Enable Ethernet Port' to 'N'
2. Run 'status clan-port 01A0517'(board location w/ port 17) [print this page]
     A. Write down Service Port Data Extension (Data Mod)
3. Run 'disp data (Service Port Data Extension from above)' [print this page]
4. Run 'remove data (Service Port Extension from above)'
5. Run 'remove ip-i 01A05' (board location)
6. Remove board and amphenol adapter from back and move them to new slot.
7. Run 'add ip-i (new slot location for board)'
     A. Copy all info from printout of 'change ip-i 01A05'
     B. Do not enable board yet.
     C. Tab until you can set Ethernet Options/Auto to 'N'
     D. Change options to 'Speed' 100 and 'Duplex' Full
8. Run 'add data (use old data mod ext/Service Port Extension)'
     A. Copy all info from printout of 'disp data XXXXXX'
9. Run 'cha ip-i XXXXX (new board location'
     A. Enable ethernet port 'Y'
10. Run 'save tran'
11. Run 'status clan-port XXXXX17
     A. Check for Active Channel 1, Link Status, Service State, and Physical/MAC Address.

Back to Avaya: CM/Aura (Definity) FAQ Index
Back to Avaya: CM/Aura (Definity) Forum

My Archive

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close