×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

INPUT/OUTPUT CRASH COURSE

What are some of the most common LOAD functions, and how are they done? by RangerPat
Posted: 3 May 04

TURN the PRINTER ON
Prompt        type        note    
>        SHIFT-SETUP        
        arrow right    general tab    
        arrow down    print mode = spacebar to select "copy"    
        arrow left    exit    
        return        
        return        should print    
            
            
TURN the PRINTER OFF
Prompt        type        note    
>        SHIFT-SETUP        
        arrow right    general tab    
        arrow down    print mode = spacebar to select "none"    
        arrow left    exit    
        return        
        return        
            
            
CHANGE the CLOCK
Prompt        type        note    
>        LD 2
        TTAD        Shows the date and time format    
        STAD        Enter new date and time, to the second (syntax: dd mm yyyy hh mm ss)    
            
            
FIND Someones PICKUP GROUP
Prompt        type        note    
>        LD 11        
REQ        PRT        
TYPE        DNB        
CUST        0        
DN        ####        to find their port, enter their DN (Extension #)    
        return        
        return        
        return        
        return        
                Write down the PORT #    
            
REQ        PRT        
TYPE        TNB        
TN        ## ##        enter the PORT # you just wrote down    
                WATCH for RNPG # (Ringing Number Pickup Group)    
            
            
EDIT Someones PICKUP GROUP
Prompt        type        note    
>        LD 11
REQ        CHG        
TYPE        2616        
TN        ## ##        Enter the Port Number (remember to change this for all a userÆs ports)    
ECHG        Yes        
ITEM        RNPG ##    Enter RNPG and the Pickup Group Number wanted    
        Return out    
            
            
CHANGE a Station's RINGER (DRG1 thru DRG4)
Prompt        type        note    
>        LD 11
REQ        CHG        
TYPE        2616        phone model    
TN        ## ##        enter the port number    
ECHG        YES        
ITEM        CLS DRG#    replace the # With 1,2,3 or 4    
        return out    
            
            
FIND a Station's PORT NUMBER (TN number)
Prompt        type        note    
>        LD 11        LD 11
REQ        PRT        
TYPE        DNB        
CUST        0        
DN        ####        enter the DN number (extension)    
        return        
        return        
        return        
        return        
TN        ????        WRITE down this number (card/port)    
        
        
            
To Check the STATUS of a CARD or a PORT
Prompt        type        note    
>        LD 11
STAT        C P        C= Card number, P= Port Number.  (ex: 6 checks all ports on card 6)    
                (ex:  6 4 checks Port 4 on Card 6)    
            
            
To EDIT the RING-no-answer and BUSY-no-answer forward to numberà            
Prompt        type        note    
>        LD 11
REQ        CHG        
TYPE        2616        
TN        ## ##        Enter TN (Port) number    
ECHG        Yes        Easy Change?    
ITEM        FDN        FDN is the RING-NO-ANSWER number.    
        ####        Enter the DID number to forward to after 4 rings if DID has no voicemail box    
ITEM        HUNT        HUNT is the BUSY-NO-ANSWER number.    
        ####        Enter the DID number to forward to when BUSY.    
            
        Set the FDN to forward to 7000 if the DID number has a voicemail box    
        Set the Hunt to the 3xxx number (as in 2130Æs rollover is 3130) on a normal phone.    
            
            
To Change the Button assignments on a Station
Prompt        type        note    
>        LD 11
REQ        CHG        
Type        2616        
TN        ## ##    Enter the port number of the phone to be changed    
ECHG        Yes            Easy Change?
        Key_##_SCN_EXT#    ## = the Key number you want to change.  See below    
                    SCN = set this to SCN if you want to see the line ringing,     
                    or to BFS if you want to see if the line is Busy.    
            
                    Key ## ADL 16  = autodial 16 digits.            
            
            
To EDIT a PICKUP group
Prompt        type        note    
>        LD 11
REQ        CHG        
TYPE        2616        
TN        ## ##        Enter TN (Port) number    
ECHG        Yes        Easy Change?    
ITEM        RPNG        RPNG is Ring Pickup Number Group    
        15        Enter the 2 digit number of the pickup group    
            
            
To Make Incoming Calls go to Voicemail (if a vacant desk becomes occupied)
Prompt        type        note    
>        LD 11
REQ        CHG        
TYPE        2616        
TN        ## ##        Enter TN (Port) number    
ECHG        Yes        Easy Change?    
ITEM        FDN        FDN is the "Forward if no answer" DN    
        7000        7000 forwards calls to Voicemail after the 4th ring    

        HUNT        HUNT is the "Forward if busy" DN    
        7000        7000 forwards calls to Voicemail after the 4th ring if the phone is busy    



How to find the Software Version of the PBX            
Prompt        type        note    
>        LD 22        
        ISS        Write down the version number


CHECK the STATUS of PORTS on a CARD (to see if an unplugged phone caused a port to disable itself)
Prompt        type        note    
>        LD 32    
        STAT ?        ? = the card number, 1 thru 6 (or whatever you have)    
                to see the status of all the ports on card 4, look at 0-15 only    
            
            
ENABLE Ports on a SPECIFIC CARD
Prompt        type        note    
>        LD 32        LD 32
        ENLC ?        To ENABLE ALL the PORTS on card ?.  The ? = the card number    
            or    
ENLU ? ?    To ENABLE a Single PORT. The first ? is the Card #, the second ? is the Port #    
            or    
        ENLS        S= Shelf.  Main cabinet is shelf 0    
            
example:  021  0  00  14  (02 is the cabinet number, 1 is the Card, 0 = ??, 00 = ??, 14 is the Port #)    


RUN an INTERNAL BACKUP on the PBX
Prompt        type        note    
>        LD 43
.        EDD        runs the backup.  Let it run.    
        ****        to log out


To Check TRUNK LINES
Prompt        type        note    
>        LD 60        LD 60
STAT or STAT 1            STAT shows status of all trunks, STAT 1 shows status of trunk 1
to Enable Loop    ENLL 1    Enables entire T-1 Loop    
to Enable Channel    ENCH 1_1    Enables channel 1_1    
to Disable Channel    DSCH 1_1    Disables Channel 1_1    


TO PRINT a PREFIX list (Prefix = SPN)  Ex:  in 270-555-1212, the 555 is the prefix.
Prompt        type        note    
>        LD 90        
REQ        PRT        
CUST        0        
FEAT        NET        
TRAN        AC1        
TYPE        SPN        
SPN        99        
            
            
To CHANGE an RLI# on an existing Prefix (SPN)    
Prompt        type        note    
>        LD 90        The RLI number tells the PBX what to auto insert in front of a Prefix #.    
                Example:  RLI 1 = Do Not autodial anything    
                                 RLI 3 = Toll Free Call    (your RLI #Æs are likely different)
REQ        CHG        
CUST        0        
FEAT        NET        
TRAN        AC1        
TYPE        SPN        
SPN        ?        enter the SPN number you want to edit    
FLEN        return        
RLI        ?        enter the new RLI number
SDRR        return        
ITEI        return        
SPN        **        
            
            
To OUT an existing Prefix (SPN)            
Prompt        type        note    
>        LD 90        
REQ        OUT        
CUST        0        
FEAT        NET        
TRAN        AC1        
TYPE        SPN        
SPN        ?        enter the SPN number you want to remove    
SPN        **        
            
            
To ADD a Prefix (SPN)
Prompt        type        note    
>        LD 90
REQ        NEW        
CUST        0        
FEAT        NET        
TRAN        AC1        
TYPE        SPN        
SPN        ?        enter the SPN number you want to ADD    
FLEN        return        
RLI        ?        enter the new RLI number
SDRR        return        
ITEI        return        
SPN        **        


ADD an AREA CODE
Prompt        type        note    
>        LD 90
REQ        NEW        
CUST        0        
FEAT        NET        
TRAN        AC1        
TYPE        NPA        
NPA        ####        1 plus the 3 digit AREA CODE you want to add    
RLI        5        
SDRR        DENY        
DENY        976        denies access to 976 porn sites    
SDRR        return        
ITIE        return        
NPA        ****        to log out    


PRINT LIST of STATION NUMBERS with STATION NAMES
Prompt        type            note    
>        LD 95            LD 95
REQ        PRT        
TYPE        NAME        
CUST        0        
PAGE            
DIG            
DN        ALL        
SHRT        YES            YES for SHORT list, or NO for FULL List    
        SHIFT-SETUP        
        arrow right        general tab    
        arrow down        print mode = spacebar to select "copy"    
        arrow left        exit    
        return        
        return            should print    
            
            
To Edit a STATION NAME
Prompt        type        note    
>        LD 95
REQ        OUT        this deletes the existing station name    
TYPE        NAME        
CUST        0        
DIG        return        
DN        enter station #        
        Return to end        
            
REQ        NEW        this creates the new station name    
TYPE        NAME        
CUST        0        
DIG        return        
DN        enter station #        
NAME     =    Firstname Lastname    
        Return to end        
            
RUN LD 43    Internal Backup        



To do a VOICEMAIL BACKUP to Tape
Prompt        type        note    
>        AX        login to Voicemail    
        General Administration        
        Volume and Selective Backup        




How to HyperTerminal in to the PBX and VOICEMAIL Systems.
1.  Launch HyperTerminal            
2.  Set phone number to your modem dialin number            
3.  Set terminal emulation to VT52            
4.  Dialà it should end up at a blank HyperTerminal window            
5.  Type the password to access the PBX modem. This will not show up on the screen when you type it.          The screen should now display ôOk, You are now transparent to port 1ö.        
6.  Type ôlogiö to login, then the password.            
7.  You should now have a > command prompt.            
            
            
To go from PBX commands to VOICEMAIL (in Hyperterminal)
1.  Go to ôFileö, ôPropertiesö, ôSettingsö and set the terminal emulation to VT100.            
2.  At the >, type ôAXö            
3.  Hit ôF1ö to bring up the command bar at the bottom.            
4.  Hit ôF1ö again to Logon.            
            
            
To go from VOICEMAIL back to PBX (in Hyperterminal)
1.  EXIT all the way out of VOICEMAIL, back to where F1 says ôlogonö (lower left button)            
2.  Go to ôFileö, ôPropertiesö, ôSettingsö and set the terminal emulation to VT52.            
3.  hit ôCtrl ]ö            
            
            
IMPORTANT û Do NOT exit HyperTerminal until you have logged out of             
BOTH the VOICEMAIL and PBX Command System (ôlogoö is the PBX logout command).            
            
            
Relevant Commands when dialed in to the PBX
Ctrl ]    To  change from Voicemail to PBX commands            
****    To back up in PBX Command mode                
ax    use at the > command line to go to Voicemail (followed by F1 when the voicemail gibberish pops up)        
logi    login to PBX        
logo    logout of PBX        
        

Back to Nortel: CS1000 (Meridian) systems FAQ Index
Back to Nortel: CS1000 (Meridian) systems Forum

My Archive

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close