×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Basic Norstar Programming

Programming Public Network DN Lengths by cowenby
Posted: 16 Jan 04

On MICS 6.1 you need to go into System programming, Dialing plan, Public network, Pub DN lengths and set the DN length for each dialing prefix.  There is an entry to set the default DN length (Prfx:Deflt...).  Also you can set the DN length for calls based on what prefix is dialed.

The international dialing and special service prefixes also need to be added.  

The other prefixes programmed in my system are:
Default - DN Length 7
0 - DN Length 11
00 - DN Length 12
01 - DN Length 17
011 - DN Length 18
1 - DN Length 11
411 - DN Length 3
711 - DN Length 3
911 - DN Length 3

If local calls are dialed as 7-digit numbers, set the Default DN Length  to 7 digits.  If local calls require that you also dial an area code, set the Default DN Length  to 10 digits.

The area codes for local calls that are dialed as 10-digit numbers should be entered as prefixes with a DN Length of 10 digits.

Back to Nortel: Norstar systems FAQ Index
Back to Nortel: Norstar systems Forum

My Archive

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close