Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Norstar Auxiliary Equipmet

Call Identification Interface (CII) by jerryreeve
Posted: 22 Jul 03

Call Identification Interface
     Software modular DR5 or compact DR5 required
     Only for modular trunks on KSU not TM
     Cables to ksu/external lines less than 25 meters long

     Two models of CII (upper right corner of cover)
          MB Modular DR5, Centrex or Compact DR5
          C6 6 line design for use with Compact DDR5

Wiring Pinouts
    Bridge tap from KSU side of lightning protectors
     25 pair amphenol connector
tab pair    trunk      pair
1    1          white/blue      
2    2          white/orange  
3    3          white/green   
4    4          white/brown   
5    5          white/slate    
6    6          red/blue       
7    7          red/orange    
8    8          red/green     

TCM loop
    Strip and connect one pair of jumper wire to
    The TCM connector and tighten screws
    Connect other end to any available station port

Back to Nortel: Norstar systems FAQ Index
Back to Nortel: Norstar systems Forum

My Archive

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close