Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing Security Codes For Meet-Me Conferencing

Meet-Me Conferencing

Changing Security Codes For Meet-Me Conferencing

by  g3si  Posted    (Edited  )
HOW TO CHANGE SECURITY CODE FOR MEET-ME CONFERENCING



1. Dial FAC that you have programmed
2. Enter Meet-Me vdn extension, then press #.
3. Enter current 6 digit access code, then press #.
4. Enter new 6 digit access code, then press #.
5. Re-enter new 6 digit access code for confirmation, then press #.
6. If successful, you will hear 3 confirmation beeps and you are finished.

Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top