Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I am missing a .dll file

Missing DLL files

I am missing a .dll file

by  nebster  Posted    (Edited  )
There are several suggestions listed about this question.
The most important one is:

[color #ff0000]Create a path in the Autoexec.bat[/color]​

If you have all of the .DLL files, then all you need is to set the path to it in the Autoexec.bat. You can use any text editor or the command from the RUN line in Windows: SYSEDIT

This is approximately what it should look like:

SET PATH=C:\PROGRA~1\Common~1\AUTODE~1;C:\PROGRA~1\ACAD2000

C:\Program Files\Common Files\Autodesk Shared;C:\Program Files\Acad2000

The ";" acts as a plus sign

If you don't have all of the .DLL files, you can find them on my FTP:
The IP address is dynamic and changes from time to time. You can find out what the latest address is by sending an email to: bfranzus@syclone.net

The login name is: acad_dll
The password is: acad_dll [color #ff0000](case sensitive)[/color]
The directory is: acad_dll

[color #ff0000]
If you are only missing one file, I will be glad to send it to you, if you find you are missing more than one, please use the FTP site, and ask someone else how to use FTP, I don't have enough time to keep explaining everything to everyone.[/color]
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top