Any help would be greatly appreciated. I have a BCM50 R6.0 with 6 SIP trunks provided by CSPIRE. Incoming works perfectly with about 30 DIDs setup as target lines. The problem is with outgoing, I've created a route 83 with destination code 9 hitting pool BlocA. I've setup the SIP programming to match the CSPIRE router and protocols but every outgoing call will disconnect at exactly 18sec from the time the call is answered. I've changed nearly every setting I can think of and tried over 100 calls still 18sec drop. CSPIRE is saying they are getting the first request to establish the call but not the second one required to finalize the connection and therefore drops the call. I'm using t7316e digital sets if that matters.
I appreciate all the time everyone puts in on this site. I know your time is valuable.
Red Flag Submitted
Thank you for helping keep Tek-Tips Forums free from inappropriate posts. The Tek-Tips staff will check this out and take appropriate action.
Reply To This Thread
Posting in the Tek-Tips forums is a member-only feature.