×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Guys, [indent]I have a BCM 450 6

Guys, [indent]I have a BCM 450 6

Guys, [indent]I have a BCM 450 6

(OP)
Guys,

I have a BCM 450 6.0 in which the remote forward from the phone set has stopped working. It only works now if the extension is dialed from internal etc 1010 from any extension and will forward to the external number set on the phone. If I dial the DID attached to extension 1010 it goes to the main receptionist. This forward has been working for a few years and seemed to just stop working about 4 weeks ago. I cannot see any changes in the settings for this phone, it is the control, prime set of the phone and target line?????

Any idea's
Thanks Steve

RE: Guys, [indent]I have a BCM 450 6

How was it forwarded to begin with?

Did you forward the set or redirect the DID/target line?
Did you have Express Messaging Line programmed?

________________________________________

Add me to LinkedIN


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: Guys, [indent]I have a BCM 450 6

(OP)
We forward the set. That has always worked on many systems.

RE: Guys, [indent]I have a BCM 450 6

Ok so you re-forwarded or it is still in a forward state?
What is the symptom exactly?

________________________________________

Add me to LinkedIN


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: Guys, [indent]I have a BCM 450 6

(OP)
If dialed internal using an extension, dialing the extension number (1010) it will forward to a cell phone every time. If you dial the DID that is assigned to that extension as Appear and ring (1010) from a cell phone or external number outside PBX It goes to the receptionist. If not on forward DID works fine and will ring extension. Stumped!!!

RE: Guys, [indent]I have a BCM 450 6

Double check:
Route XXX told to use PRI-X
Dest code told to use route XXX
Allow Redirect is ON
Target line must be assigned to Appear and Ring at that phone.
2 Intercom keys
Carrier to allow Trunk to Trunk transfer
Target XXX Prime Set is the DN in question (or None) and not reception.

Outta Ammo!

________________________________________

Add me to LinkedIN


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: Guys, [indent]I have a BCM 450 6

It sounds to me your carrier has started blocking trunk to trunk transfer. This is typically an optional feature on PRI/T1. They probably discovered you had it enabled and were not paying for it.

Marv ccna

RE: Guys, [indent]I have a BCM 450 6

(OP)

I had some DIDs adding and i'm having CLID issues I believe you got it. I will get with carrier. THANKS AGAIN

RE: Guys, [indent]I have a BCM 450 6

(OP)
My carrier is of course saying that they have no control and the vendor can only control trunk to trunk transfer and that I have turn it off. This worked fine 30 days ago and still works in a Ky location just fine. We have done no changes to either switch and Windstream in Houston is the only people doing anything to one of our PRIs. So the carrier is the problem right? All settings check out fine and match with the Ky office which is a different Carrier?

Please Help

RE: Guys, [indent]I have a BCM 450 6

Escalate with repair to a supervisor.
Maybe ask for Sales from the start and ask them is Trunk to Trunk transfer and option, if they say yes then let them know Repairs says it is always allowed and escalate from there.

Carrier allows the feature on the circuit
PBX controls which sets are allowed.

If you insist your settings are fine there is nothing for us to help with.


________________________________________

Add me to LinkedIN


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: Guys, [indent]I have a BCM 450 6

(OP)
Thanks Curlycord we are escalating tomorrow.

RE: Guys, [indent]I have a BCM 450 6

To be sure it's the CO rejecting the call, you could start BCM Monitor, go to the UIP tab, enable the PRI span used for the outbound call and make one such call. If the incoming call is forwarded to the external number, you should see the setup message for the outbound call from BCM to CO and a response from the CO. If the problem is your BCM configuration, you would see just the incoming call, but no outgoing one.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close