×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Connecting KX-TDE100 to NS1000 over QSIG/voip (IPGW)

Connecting KX-TDE100 to NS1000 over QSIG/voip (IPGW)

Connecting KX-TDE100 to NS1000 over QSIG/voip (IPGW)

(OP)
Hi,
I am trying to connect TDE100 with NS1000 over IP NETWORK. i have below extension plan,

TDE100, 28XX
NS1000, 29XX

Could anyone help me how to connect both pabx and able to dial each other extensions?

RE: Connecting KX-TDE100 to NS1000 over QSIG/voip (IPGW)

Hi you can use sip trunk or pri or qsig
In tie table you can provide other pbx code for direct dialibg.

http://telfonika.blogfa.com

RE: Connecting KX-TDE100 to NS1000 over QSIG/voip (IPGW)

I would use IPGW card as it is designed for this job, QSIG is old out dated method
you have to setup a vpn between both systems

you will have to clear 29 on the tde and 28 in the ns1000 in flexible number plan so you can put them in other pbx on opposite systems

in the gateway card you gave to setup ips of the systems in GW settings and tell the system in DN2IP what numbers go out that gateway

you also have to setup private network digits to trunk the ip gateway lines are on, Default is 7

check in hunting pattern that the other system lead numbers are here or the calls wont come in.

that's is a brief outline of what you have to do. see how far you get with that

one thing is you have to tell the system in licencing what the sip trunk licence is being used for, trunk or gateway. that is on the top of the page

RE: Connecting KX-TDE100 to NS1000 over QSIG/voip (IPGW)

(OP)
Hi OBTSYSTEMS,
Thanks for your detailed reply. Could you provide me any document which have sample configurations steps? I will be grateful to you.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close