Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.


Panasonic to FreePBX 10.13.66 Asterisk 11

Panasonic to FreePBX 10.13.66 Asterisk 11

Hello guys,

i am hoping you are all doing just fine.
I am experiencing a problem with my integration of the two.
I have an E1 from a Telco plugged into Port-1 of the Digium 1TE235BF & Port-2 of the Digium 1TE235BF is connected to the PRI30 card on the Panasonic.

On the FreePBX, the dial plan is as below;
X. ---> to the PSTN through Span-1
Asterisk to Panasonic ,1XX, 2XX, 3XX, 4XX & 5XX ---> towards KX-TDA200 through Span-2

Panasonic to Asterisk is, Press 9 get dial tone then dial 11XX (Automatic Route Selection, ARS setup in KX-TDA200)
i.e Extensions on the Asterisk are 11XX

Span 1 is set as;
Group 0

Switchtype : EuroISDN
Signaling : PRI-CPE
Coding : HDB3
Framing : CCS
Clock source : 0

Span-2 is set as;
Group 1
Switchtype : PRI-NET
Signaling : Q.SIG
Coding : HDB3
Framing : CCS
Clock source : 1

Setting on Panasonic KX-TDA200 is;
Program 1.Configuration -> 1.Slot -> PRI30 Port property, i set Port Type to QSIG-Slave.
CRC4 is Enabled. Outbound calls to PSTN from FreePBX work fine. However calls to Panasonic from FreePBX and calls to FreePBX from Panasonic are not working just yet.

Also i configured incoming calls from the PSTN through SPAN-1 to be forwarded to Trunk (SPAN-2 -> TO KX-TDA200.
Incoming calls through Span-1 gets a message "The number you have dialed is not in service , please check the number and dial again" from asterisk.

Any idea on what i could be missing?.
Will be grateful for some helpful responses

NOTE: Call to PSTN from Panasonic, do not go out. Dialing is Press 9, get dial tone then number (Instead get response from Asterisk)

RE: Panasonic to FreePBX 10.13.66 Asterisk 11

All problems fixed.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close