INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

BCM50 Intercom Code Change.. Instructions needed

BCM50 Intercom Code Change.. Instructions needed

(OP)
Hello All,

I have scrolled through this forum but can not seem to find the answer hence my post (apologies if there is a similar post)

We currently use a BCM50 system with Avaya 1220 IP desktop handsets. Our main entrance has a BT intercom system which uses a 4 digit code to release the magnetic strip on the door or if the call button is pressed all the handsets in the office ring, If any on the handset is picked up we can talk to the person outside and then press the number '8' on our handsets to release the door.

We would like to change JUST the 4 digit code. Attached is a photo of our lines on BCM Element Manager showing the DN of the door as 214 (analog).

Would be grateful if someone could provide instructions on how to change the 4 digit entry code.

RE: BCM50 Intercom Code Change.. Instructions needed

Just double click on 214 and change it to whatever 3 digit number you want. Just make sure it doesn't conflict with anything else you have programmed.

Just out of curiosity, why do you want to change the DN on the doorphone. The only thing it's usually used for is to dial an extension number or hunt group.

RE: BCM50 Intercom Code Change.. Instructions needed

I think the 4 digit code is the door entry code to release the magnetic lock is what you are looking for

This is done on the door phone and not on the BCM50

Normally BT use a company called north supply to install there intercom door systems.
Check there web site for info.

It took me 2 minutes to find this on Google.and you can down load the manual.

Dial the extn number and when answered press *900 and wait for beep
Enter password 1234. Default.

Press *442 and enter new code.

But please check the manual first before doing this..

RE: BCM50 Intercom Code Change.. Instructions needed

OK, reading that post again, it looks like the doorphone has a keypad on it where they can enter their 4 digit code to open the door. It also has call button that works similar to a Nortel BST doorphone where they use the digit 8 to open the door remotely.

If that's the case, the 4 digit code on the door phone keypad has nothing to do with the BCM directly.

RE: BCM50 Intercom Code Change.. Instructions needed

Having been involved with BT many years ago and Norstar / BCM for a long time (too long!), I was also thinking it wasn't anything on the BCM as I couldn't find any notes on the door phone.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.com
linkedin

RE: BCM50 Intercom Code Change.. Instructions needed

(OP)
Thank you all for your replies. It wasn't the DN that I need to change just the 4 digit entry code. We need to change it due to some unseen change in circumstances in the company.

Will try the option given by snowman50 to see if it works as the link by curlycord has the manual.

Thanks a lot guys

RE: BCM50 Intercom Code Change.. Instructions needed

Yes turns out snowman and I were talking about the same product, I did not pickup on that fast enough.

________________________________________

Add me to LinkedIN


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close