INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

MICS 7.1 Night Service w/PRI "Need HELP"

MICS 7.1 Night Service w/PRI "Need HELP"

(OP)
I have a customer who just switched from analog lines to a PRI. Before they had a night button that when activated it with add more extensions (and a bell on the wall) to ring on incoming calls. That way if the receptionist was away from her desk other people would hear the calls coming in. I have not been able to reproduce this after the PRI. I am missing something but don't know what. Any help would be greatly appreciated.

RE: MICS 7.1 Night Service w/PRI "Need HELP"

You need to remove the copper trunk line 0XX and replace with target line 1XX under Service Modes/Schedule/Night/Line settings as an example.

________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: MICS 7.1 Night Service w/PRI "Need HELP"

(OP)
Thank You for the quick response. Can I replace with Lines 001-023? I have the extensions that I want to ring in Ringing Group 001 and the Night Service set manual, the Control Set is 201 (which is the Prime Set) but I cant seem to find where I assign the lines.
Long story short, customer had a 0X32 running ver 1.x, so I replaced the whole KSU with new one running 7.1 that had DTI card and Combo card installed, with PRI enabler. Everything is working great except Night Service button.
I'm heading out to customer site so I will be able to check programming.

RE: MICS 7.1 Night Service w/PRI "Need HELP"

No, per above your lines ring in on Target Lines which start at line 157 and up.
Most will use 157 with the main number then the rest for others.
When you are "Manual" which is the first option under "Night" keep pressing Next until you see "Line Settings".

________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: MICS 7.1 Night Service w/PRI "Need HELP"

(OP)
That worked perfect, I assigned the main numbers to Target Lines and edited the Line settings and all is good now.
Thank you very much for your help.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close