INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Nortel 1120 E phone not able to perform lookups

Nortel 1120 E phone not able to perform lookups

(OP)
Hi all, hope you can help as i'm a bit stumped. We were doing some network reconfiguration about 2 weeks ago, and ever since the networking was done (unfortunately i can't go back) the phones are able to make and receive calls, however they are not able to use any of the advanced phone features like looking at the call logs to see who has called

*Edit to provide further information.
We are a Nortel CS1000. We have Call Pilot as a VM as well as HMS400
this is in a cabinet that has been rebranded as an Avaya

All plugged in network ports have link lights.

I double checked the networking and it looks like all the vlans are in place as they should be, but not really certain what is missing or what piece to troubleshoot next. any insight would be greatly appreciated.

Thank you

Eugene

RE: Nortel 1120 E phone not able to perform lookups

Call logs are managed by an application on your signaling server. It is either not running or you have lost connectivity to it.

RE: Nortel 1120 E phone not able to perform lookups

(OP)
Does the signaling server have a separate IP address from the main server? How do i check to see if the signalling server is running?

RE: Nortel 1120 E phone not able to perform lookups

Login to cs1000 and go to load 117 and do stat serv that will show signaling servers voice gateway cards and if they are connected to cs 1000

RE: Nortel 1120 E phone not able to perform lookups

As said before, go into LD 117 and key in STAT SS. You should be able to see if any of he IP phones are registered OK. In most cases, you will probably need to reset the Sig Server so that it will sync correctly with the core CS1000e server.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.com
linkedin

RE: Nortel 1120 E phone not able to perform lookups

(OP)
So this is what i get as a result.
I'm not certain if i'm reading it correctly but with the state of Link Up, i would think it should be good.
How would i go about restarting the signalling sever? do i just need to power cycle the pbx cabinet?



NODE ELANIP LDR SRV PBXLINK HOSTNAME
ID STATE
1003 172.16.13.20 YES Avaya CPDC LINK UP sig1.domain.com
APPS: LTPS VTRK
PBXLINK DATE: 03/11/2016
PBXLINK TIME: 19:08:19
CONNECTID: 65ecde8
APPLICATION NODE ID: 1003
Sets: [reg - 00000] [busy - 00000] [dvla - 00000]
VTRK: [reg - 00015] [busy - 00000]
SIPL VTRK: [reg - 00000] [busy - 00000]
SIGNALLING SERVER CAPACITY (SSRC): 4096
Type: Avaya CPDC
Location: 0 0 23
Product Eng.Code: NTDW53AAE60005
Serial Number: 12N506300005CPDC
Memory Size: 2048 MB
Disk Size 232 GB

1004 172.16.13.21 YES Avaya CPDC LINK UP sig2.domain.com
APPS: LTPS VTRK SLG
PBXLINK DATE: 15/10/2016
PBXLINK TIME: 01:49:02
CONNECTID: 65ecce8
APPLICATION NODE ID: 1004
Sets: [reg - 00081] [busy - 00004] [dvla - 00000]
SIPL UEXT: [reg - 00000] [busy - 00000]
VTRK: [reg - 00015] [busy - 00000]
SIPL VTRK: [reg - 00000] [busy - 00000]
SIGNALLING SERVER CAPACITY (SSRC): 4096
Type: Avaya CPDC
Location: 0 0 23
Product Eng.Code: NTDW53AAE60005
Serial Number: 12N506300046CPDC
Memory Size: 2048 MB
Disk Size 232 GB

RE: Nortel 1120 E phone not able to perform lookups

So all the sets are registered against Node 1004 in the node properties under personal Directories is it enabled?
In the IP config under personal directories server is the ELAN of the Sig Server you are using for PD correct?

RE: Nortel 1120 E phone not able to perform lookups

(OP)
turns out a late night graceful power cycling of phone system brought all systems back online. was hoping for a command line to restart signalling server however was not able to find one in time and had to restart.

RE: Nortel 1120 E phone not able to perform lookups

When you say command line to restart the SS you mean just the SS applications of the server itself?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close