INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Dear Team, I have problem to act

Dear Team, I have problem to act

(OP)
Dear Team,

I have problem to activate the DOD No's in MD110 EPABX with Version BC12 Please help me on this.

RE: Dear Team, I have problem to act

what is DOD?

RE: Dear Team, I have problem to act

(OP)
Dear Team,

Direct Outward dialing no and also if i am calling through the Extn it show Extn no also.

RE: Dear Team, I have problem to act

your extension adc and also route parameters (no type mentioned here) need to be set as NOT to restrict the A-number sending to PSTN.

RE: Dear Team, I have problem to act

(OP)
Dear Team,

Please find the below.

find the below command for the DID

EXCAC:DIR=7125,ADC=000000001;


Please suggest me on this

ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000210 H'00000000 H'00010000 NO
2 TL11 H'00000012 H'00000488 H'00000705 NO
3 SL60 H'00000350 H'00000000 H'00010000 NO
4 SL60 H'00000350 H'00000000 H'00010000 NO
5 SL60 H'00000350 H'00000000 H'00010000 NO
6 TL11 H'00000012 H'00000488 H'00000705 NO
7 TL11 H'00000012 H'00000488 H'00000705 NO
8 TL11 H'00000012 H'00000488 H'00000705 NO
10 SL60 H'00000350 H'00000000 H'00010000 NO
11 SL60 H'00000350 H'00000000 H'00010000 NO
12 TL11 H'00000012 H'00000488 H'00000705 NO

ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7120000000000010 7 3100000007 0 30 128 00151515 211110000030 111111
2 7120000000000010 4 3100000000 0 30 128 00151509 200001000000 001100
3 7120000000000010 7 3100000007 0 30 128 00151515 211110000030 111111
4 7120000000000010 7 3100000007 0 30 128 00151515 211110000030 111111
5 6120000000000010 7 3100000007 0 30 128 00151515 211110000030 111111
6 7120000000000010 4 3100000000 0 30 128 00151508 200001000000 001100
7 7120000000000010 4 3100000000 0 30 128 00151508 200001000000 001100
8 7120000000000010 4 3100000000 0 30 128 00151508 200001000000 001100
10 7120000000000010 7 3100000007 0 30 128 00151515 211110000030 111111
11 7120000000000010 7 3100000007 0 30 128 00151515 211110000030 111111
12 7120000000000010 4 3100000000 0 30 128 00151508 200001000000 001100

RE: Dear Team, I have problem to act

(OP)
Dear Team,

Please provide the command for the same.

RE: Dear Team, I have problem to act

Try first to change the adc to ADC=010000001. I assume you are using ISDN to call/receive calls? if yes, which route(s)? If you don't know, check from roddp the external dialled number (or maybe you are using LCR). Your ISDN parameters are really from old times. Note that the SP has definitely changed everything since 2005 or earlier....

RE: Dear Team, I have problem to act

(OP)
Dear Team,

i checked which have you mention above adc it's not working. please find the below roddp.


DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
0 10 0005000000000250000000000 0 2 0
10 10 0005000000000250000000000 0 1 0
12 6 0005000000000250000000000 0 3 0
13 8 0005000000000250000000000 0 3 0
14 7 0005000000000250000000000 0 3 0
15 2 0005000000000250000000000 0 3 0
30 11 0005000000000250000000000 0 3 0
48 2 0005000000000250000000000 0 3 0

RE: Dear Team, I have problem to act

answer the question: Which number you are dialing to get external line? 0 or something else? Did you change the ADC of the extension and test with the same one? Do you have a documentation of MD110?

RE: Dear Team, I have problem to act

(OP)
Dear Team,

for external line i am dialing 0 then destination number. and i am not have complete documentation of MD110. if is there please share document it's helpful for me.

RE: Dear Team, I have problem to act

To change the rodap parameters is a tricky one: You have to remove all trunks from the route (10 in this case), then run rodai. After that initiate back the trunks. If there is traffic on the lines, no removal of the trunk(s) is possible without additional commands, so this has to be done during low (or none) traffic. Depending of your country, there are some differences in the settings, so where are you (or actually the PBX)? The documentation - use IE or Firefox or similar and start searching, it is there....

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close