INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

BCM50 BST Doorpone programming

BCM50 BST Doorpone programming

(OP)
I have not been able to find a door phone heading in the element manager to program a door phone target DN can someone help me?

RE: BCM50 BST Doorpone programming

A Door Phone is a Digtal set so look under sets and go to the DN it is on.
Under Capabilities you will see the Door Phone heading.
Note you can use a Hunt Group DN too if several people are to answer the door.

________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: BCM50 BST Doorpone programming

(OP)
I don't see the doorphone heading in capabilities??

RE: BCM50 BST Doorpone programming

Are you sure its a digital door phone?
Maybe your looking the wrong DN? do you even know the DN?

________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: BCM50 BST Doorpone programming

(OP)
Yes the extension is programmed as required I just don't get a heading door phone to programme a target DN etc....?

RE: BCM50 BST Doorpone programming

Did you change the "Name" the extension's DN to Door Phone? If not, it'll will say 223, 229, etc

RE: BCM50 BST Doorpone programming

(OP)
Yes I've changed to "Ext Door"

RE: BCM50 BST Doorpone programming

Are you sure your doorphone is BST doorphone and not an older Nortel doorphone? For it to show up in EM as a Doorphone, it has to be a BST model. They both look exactly the same so it's sometimes hard to tell.

RE: BCM50 BST Doorpone programming

(OP)
I'm not on site until later this week to confirm
Which one it is...do you know the part no. Of both types??

RE: BCM50 BST Doorpone programming

Yes
There can be several part numbers for the same products.
I am sure you will get the part number then google it, but if still unsure post it here.

Attached below is a screen shot for you to download in case you maybe looking in the wrong area.


________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: BCM50 BST Doorpone programming

(OP)
I'm looking in the right place.. is the presumption that the
Element Manger has not recognised that the door phone unit
Is not connected hence door phone tab is not showing in capabilities??

RE: BCM50 BST Doorpone programming

If you have a proper working BST door phone and is connected properly then yes of course it will populate the programming.
We are blind to this site and little info provided.
New install? repair call? what did you do when on site to troubleshoot?






________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: BCM50 BST Doorpone programming

(OP)
Its a new install on a Rls6 my supplier is sending out a confirmed BST door phone unit will update once I'm back on site...

RE: BCM50 BST Doorpone programming

This may be a stupid question but is your carrier using long distance codes? It may just be waiting for you to enter an authorization code.

By your description, you are instructing the system to dial the outbound number as a long distance call. If it isn't, remove the 1 as your carrier might not process a local call if it is dialed as LD.

RE: BCM50 BST Doorpone programming


Telefever
Tell-A-Fee-ver
A condition known to hard working telecom personnel
Symptoms - may have too many tabs open in web browser
Cure - laughing works



________________________________________

Add me to LinkedIN

**New Allworx Forum**


=----(((((((((()----=
www.curlycord.com
Toronto, CAN

RE: BCM50 BST Doorpone programming

LOL........right question/answer, wrong post!

RE: BCM50 BST Doorpone programming

(OP)
Just to let everyone know it was the the right
Door phone unit(BST)I did a reboot and the door phone
came up in capabilities.. thanks to everyone that responded

RE: BCM50 BST Doorpone programming

You have to remember that when you add a BST door phone, you have to reboot the BCM.


Light Travels Faster Than Sound, Which Is Why Some People Appear Bright Until You Hear Them Speak.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close