INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

PRI not coming up

PRI not coming up

(OP)
I was hoping that a second set of eyes could look at these settings from the telco and let me know if these look correct for an Option 11:


ISDN PRI Protocol: B8ZS/ESF with National ISDN-2
New or Existing Trunk Group: New
Quantity of Trunks Ordered: 23B + 1D
Trunk Type: Two-Way (DID/DOD)
Signal Type: Q931 PRI
Trunk Selection Sequence: Ascending Sequential
PBX Store & Route Digits: Yes
If Yes, Number of Digits to be sent: 4
Pilot Number: 702-634-7000
Assign Test Number: 702-634-7000
POTS/DID Numbers to be Added (Inc. DID): 702-634-7000-7999
Backup D Channel Assignment: None
Customer Switch Type: Dedicated
Return DT on Seizure: No
Caller ID Name & Number: Yes
InterLATA PIC: 5046
IntraLATA PIC: 5046
Yield to Glare: Yes
Call Blocking: No


MY SWITCH:
ADAN DCH 10
CTYP TMDI
CARD 02



PAGE 001

PORT 1
DES Local
USR PRI
DCHL 2
OTBF 32
PARM RS232 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
RCAP COLP
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO


DLOP NUM DCH FRM TMDI LCMT YALM T1TE TRSH
PRI 02 24 ESF YES B8S FDL 0 00
MISP

RE: PRI not coming up

If this is a new circuit, please ensure the carrier has released the Bchannels and the Dchannel. If new circuit in US, this is normally the last step of the turnup.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/

RE: PRI not coming up

(OP)
The circuit is turned up. If I unplug the PRI from the Option 11 and plug it in to an Avaya IP Office, it comes right up and works fine.

RE: PRI not coming up

If you are going from the Opt 11 to an IPO then you are probably using a crossover cable? Are you using a straight through cable going to the Telco?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close