INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

(OP)
I am wanting to do an enhanced trace on all channels of a PRI, instead of one channel at a time...is this possible?

Thanks, Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint

RE: CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

Perhaps just turn on DCH monitor in LD 96?

RE: CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

(OP)
Thanks firebird...

StanleySteamer...hmm, I didn't think about DCH monitor...I may try that...

Thanks boy, Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint

RE: CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

Not sure what you are trying to accomplish but you can also get a snapshot of all the route members if you do
LD 80
.trac 0 xxxx

where 0 is the customer number and xxx is the route ACOD.

RE: CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

(OP)
StanleySteamer, customer has an Asterix enterprise phone system that is dependent on our system for outbound calling. I have a QSIG PRI tying the two systems together.

The enterprise guys did a server upgrade a couple of months ago and now some of their outbound calls are causing the callers issues, no ring tone on their end, no CID at times, etc. I found that they have their side of the PRI setup to where every outbound call hops to a different channel.

I finally got the traces I needed, but I was constantly hopping back and forth from ld 60 to see which channel they accessed, and then back to ld 80 for the trace. All outbound call coming from them lands on me as UNKNOWN, they are sending the info to the Audiocode guys, I guess...anyway the ball is back in their court.

I didn't think about tracing the route...that may have worked

Thanks, Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint

RE: CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

create a test RDB (same config as the existing route) move 1 channel into that route. Add an ARRN for your test number to go down the new route. Now you can LD 80 trace the one channel

RE: CS1000e 5.5 Enhanced trace on all 23 channels of a PRI

(OP)
Thanks for the replies

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close