INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Dect issue after reinstalling system

Dect issue after reinstalling system

(OP)
Customer has dismantled his working BP250 with 5 dect wired base stations, this without annotate each base to pbx port association
On the new site three bases are no more working, there are two dect cards (I don't remember the code/name) For each combination of base/port , only the base connected to the fisrt port of each card works, the others have quick blinking leds or yellow steady led.

I'm completely unaware of Ericcson pbx philosophy, can you help me in understand what is going wrong ?
There is a rigid configuration/association between bases and ports ?
Is there a master base like other systems ?

Thank you

RE: Dect issue after reinstalling system

Hi you most init cxcfi &cxrfi and cinect sync cable between elu31

RE: Dect issue after reinstalling system

(OP)
I'm sorry , but I don't know what cxcfi and cxrfi are ...sad
I don't know even basically ericsson machines
Just to know why , after a pbx shutdown , move and restart , it doesn't work anymore....
So , do I need maintenance cable and software to resume working condition ??
Thanks

RE: Dect issue after reinstalling system

As you use a BP250 you can forget these commands cause they are for MD/MX one.

When you connect these bases to the same port as before you have to do nothing
but when you connect them to an unused port you have to add them
in the programming (BMS or CSM).

When you are not familiar with this software I would try other ports.
Connect a blinking base to a port where the LED is green and the base should work automatically.
Now you know if the base is working or not. After that connect it to another port.
You can connect 4 bases to the ICCU-2 and 8 bases to the ICLU.

RE: Dect issue after reinstalling system

(OP)
Thanks for replies,

System is equipped with one IC-CU2 and one IC-LU , five bases total (not known which ports they were connected to)

Anyway I've found IC-LU cable completely mis-connected that caused each inner pair to go to the outer pair, solved

It remains to understand why some bases are not working (I've found anyway that after many checks , connect, disconnect and so on, dect system messes up and needs a reboot to work correctly....)

RE: Dect issue after reinstalling system

(OP)
Solved !

It was simply a wiring issue

Previous installer has forced dect cells cabled upside-down into IC-CU2 ponder , checking each single wire to connection box has solved issue...

Thank you anyway for all suggestion.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close