INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Cisco 2911 and AT&T 3xT1 issues

Cisco 2911 and AT&T 3xT1 issues

(OP)
Recently we had AT&T install a 3xT1 in our company. We are having issues getting it configured on our 2911.

Here is the scenario the line in from AT&T is a single line according to AT&T tech the 4.6 MB connection is on the one line.

What interface card should I be using for this single line and how do I configure it.

Trying to get info from AT&T has been like pulling teeth.

RE: Cisco 2911 and AT&T 3xT1 issues

If it's 3 T1s and a 4.6MB connection then they are bundled. What you need to know is if they are handing off 3 T1s to you or it's Ethernet handoff.
If it is Ethernet then you just need to connect it to one of you 2911 gigE interfaces. If it is T1s you will need 3 HWIC interfaces, probably a dual and a single module would be the way to go.
Without knowing what you are getting from ATT its all a guess.

RE: Cisco 2911 and AT&T 3xT1 issues

(OP)
At&the handed us one T1 interface. When they were here they tested that port and showed me that the signal was 4.6 up and down. Because of being a single port I thought it should go to the GigE port but the smart card would not get a carrier detect. When we plugged it into our T1 wicked then we have carrier detect. I see it that we should have 3 smart jack ports or a way to split the signal. Everything I have read is there should be 3 T1 ports.

RE: Cisco 2911 and AT&T 3xT1 issues

A single T1 maximum speed is 1.54 mbps. Does ATT have a router installed on site? Was the tech connected directly to that router via Ethernet?

RE: Cisco 2911 and AT&T 3xT1 issues

(OP)
The tech plugged into the smart jack. So it sounds like I need 2 more smart Jackson. To have my 3 T1 ports.

RE: Cisco 2911 and AT&T 3xT1 issues

Don't you just love speech-to-text/autofill?

ip access-list extended IP-Options-and-Powerball
deny ip any any winning-powerball-ticket
permit ip any any option any-options
!
class-map ACL-Options-and-Powerball
match access-group name IP-Options-and-Powerball
!
policy-map CoPP-POLICY
class ACL-Options-and-Powerball
drop
!
control-plane
service-policy input CoPP-POLICY

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close