INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Jobs from Indeed

BCM 450 new install

BCM 450 new install

(OP)
main cabinet on BCM 450 6.0 has
DTM
GATM8
ASM


expansion has 3 DSM 32+ in slot 1,4 1,5 1,6 says enabling
phone connected and just flashes
keycode is good
patch cable is straight through and 5ft long
dip switches are correct


????HELP????

JPH

RE: BCM 450 new install

I seem to recall that you need to look via the BCM Element Manager Application or Telephony Resources etc to the area that shows you the BCM Bus sections as there should be some dip switch settings that you will need to make a note of in order to apply in to your BCM DTM module.

You may also need to disable the module and then enable it again. I'm not sure if I have attached the correct help file.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.com

RE: BCM 450 new install

A good old fashioned reboot has never hurt when I've had weird things happen trying to enable modules.


Also.. The cable is supposed to be 16.4 feet.

www.number1telecom.com

RE: BCM 450 new install

(OP)
dip switches are correct

rebooted yes
disabled and re enabled yes

cable was 25ft changed to 5 ft still no change

moved mbm to main cabinet and works

moved to 1,2 in exp and doesnt work

JPH

RE: BCM 450 new install

You did not say if you did but in resources under expansion X did you select the drop down under configured device and select the appropriate MBM?
Did you also connect a phone to any one of the ports?

________________________________________

Add me to LinkedIN

=----(((((((((()----=
www.curlycord.com


Toronto Canada
www.telcopc.ca

RE: BCM 450 new install

(OP)
it turned out to be a bad patch cable all good now ty

JPH

RE: BCM 450 new install

2 bad cables, a 25' and a 5'....what are the odds?

________________________________________

Add me to LinkedIN

=----(((((((((()----=
www.curlycord.com


Toronto Canada
www.telcopc.ca

RE: BCM 450 new install

(OP)
ya it seems it like 16ft ONLY

JPH

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close