INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

BP250 H323 TRUNK

BP250 H323 TRUNK

(OP)
Hello everyone. Those who have already had occasion to set up a BP250 to be connected via H323 with another telephone exchange. To clarify, I need to connect a BP250 that has on board the IPU with UCP100 Ericsson / LG.
Thank you all.

Miran Piscanc

http://www.mpcommunications.it

RE: BP250 H323 TRUNK

I have once connected a MFIM50B to a BP250 via H323 trunk,
so what excatly is your question?

RE: BP250 H323 TRUNK

(OP)
Perfect, the UCP100 is the evolution of MFIM50B. Just that I was looking for. How do I program the BP250 to connected via trunk h323 with MFIM50B? What settings have to follow?
Thanks

Miran Piscanc

http://www.mpcommunications.it

RE: BP250 H323 TRUNK

-create a route with IPU channels
-in the menu Network Ip address set:
Node Ref: 1
Signalling Protocol:102
Network Ip address: Ip of the UCP
Port number: 1720

-set 2194 to 1720 and 2185 to 17200
-create a PNR which routes the wanted numbers to node ref 1(9117)
Destination PBX must be "Other vendor PBX"

RE: BP250 H323 TRUNK

(OP)
I add an indication: the BP makes the call as seen by the firewall, but the MFIM log does not know what to do, so it does not sound anything

for privacy I masked some figures of public IP

Miran Piscanc

http://www.mpcommunications.it

RE: BP250 H323 TRUNK

In UCP put some CO lines in an own CO group.
Type should be common or H323.

The other programming for incoming calls depends what you send with BP.
When you just send the station number you can use "use as is"
and the station should ring.

For calls from UCP to BP you can program networking or LCR.
When you use networking feature you need a networking license in UCP.

RE: BP250 H323 TRUNK

(OP)
Thank you.
I attach a few screenshots to show the programming of UCP, because I still can not run.
BP sent directly from the extension number.


.



Miran Piscanc

http://www.mpcommunications.it

RE: BP250 H323 TRUNK

I have just made a quick test with an eMG80 and a BP250 and it is still not working here.
There seems to be some changes in the H323 networking compared with a MFIM.

As we donĀ“t sell ELG any longer I have no idea how it is working with this unified software
that UCP, eMG80 and eMG800 uses...

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close