INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Jobs from Indeed

How my system do a outgoing call

How my system do a outgoing call

(OP)
Hi everyone, i have a question about Nortel CS1000B. My extensions dont do the call, and i think that my Trunk SIP dont work fine. First, my RLI go to the PRI and second to the Trunk TIE SIP, with the System Manager. My configuration its BARS SPN. Regards

RE: How my system do a outgoing call

Suggest recreating one of the area codes as an NPA (if you are using 10 digit dial). Since this is a branch office, in normal condition, are all phones registered to the main office (IP)? If so, you will need to verify your ip zone dialing at the branch office. I believe in order for zone dialing to work properly you will need the proper digit manipulation in order to strip the zone number once the outbound call hits the main in order to dial out on your first choice; PRI. On my first comment, SPNs in LD 90 can be very limiting especially when tandem-ing across networks.

RE: How my system do a outgoing call

Keeping it simple and starting w/ the basic first. Make sure your NCOS is correct for external calling.

A Tek-Tip Lover

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close