INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

MIP on one of the trust network IP device for DMZ access

MIP on one of the trust network IP device for DMZ access

(OP)
Hello,

It a SG140 FW. I have a device in trust network which I want it to be seen by DMZ device by using MIP 1 to 1. I don't want to use any routing between DMZ and trust network. Anyway to do it?Example of IP below.

0/0 Trust Network = 192.168.1.254

0/1 DMZ network = 10.1.1.254

Actual trust network IP device=192.168.1.10. I want to map this IP to 10.1.1.250. So my device in DMZ can ping 10.1.1.250 which are refering to 192.168.1.10 host.

Appreciate any advise.

RE: MIP on one of the trust network IP device for DMZ access

I believe that routers with zone architecture, like all Juniper Networks and Fortinet firewall routers, you have to add a policy in order for data transmission to pass between the zones where you want to establish or allow a path. If you are not familiar with this type of configuration, you can download documentation from Juniper Networks web site. It does have some examples of some of configurations. There is a Juniper Networks Forum also, that is more active than the Tek-Tips Juniper forum. You might check it out.

Hope this helps!
....JIM....

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close