INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Hello everyone, I want command t

Hello everyone, I want command t

(OP)
Hello everyone,

I want command to check cards in my system(WinFiol-MD110) , also how many card i have and type of cards.

Thanks

RE: Hello everyone, I want command t

(OP)

Also i want check card status , because sometimes i have seen red light on cards

RE: Hello everyone, I want command t

CNLIP:DEV=YES, LIM=ALL; will print boards and their status.

/Daddy

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

(OP)
thanks for reply , please check the result and explain to me
<CNLIP:DEV=YES, LIM=ALL;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A STANDBY
B EXECUTING 0 ACTIVE
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 10466 KB 10466 KB
BUAR1 4111 KB BUAR2 3185 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 SYSTEM BLOCKED
001-0-20 117 32 ACTIVE
001-0-30 117 32 ACTIVE
001-0-40 118 32 ACTIVE
001-0-50 121 32 ACTIVE
001-0-60 42 32 ACTIVE
001-0-70 NOT EQUIPPED
001-0-71 NOT EQUIPPED
001-0-72 NOT EQUIPPED
001-0-73 42 1 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 117 32 PASSIVE
001-1-30 118 32 ACTIVE
001-1-40 118 32 ACTIVE
001-1-50 124 12 ACTIVE
001-1-52 NOT EQUIPPED
001-1-53 NOT EQUIPPED
001-1-60 42 32 ACTIVE
001-1-70 NOT EQUIPPED
001-1-71 NOT EQUIPPED
001-1-72 NOT EQUIPPED
001-1-73 42 1 ACTIVE
001-2-00 NOT EQUIPPED
001-2-01 NOT EQUIPPED
001-2-02 NOT EQUIPPED
001-2-03 NOT EQUIPPED
001-2-10 106 16 ACTIVE
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 124 12 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 118 32 ACTIVE
001-2-40 118 32 ACTIVE
001-2-50 118 32 ACTIVE
001-2-60 118 32 ACTIVE
001-2-70 NOT EQUIPPED
001-2-71 NOT EQUIPPED
001-2-72 NOT EQUIPPED
001-2-73 NOT EQUIPPED
001-3-00 NOT EQUIPPED
001-3-01 NOT EQUIPPED
001-3-02 NOT EQUIPPED
001-3-03 NOT EQUIPPED
001-3-10 NOT EQUIPPED
001-3-11 NOT EQUIPPED
001-3-12 NOT EQUIPPED
001-3-13 NOT EQUIPPED
001-3-20 NOT EQUIPPED
001-3-21 NOT EQUIPPED
001-3-22 NOT EQUIPPED
001-3-23 NOT EQUIPPED
001-3-30 102 32 ACTIVE
001-3-40 118 32 ACTIVE
001-3-50 118 32 ACTIVE
001-3-60 118 32 PASSIVE
001-3-70 NOT EQUIPPED
001-3-71 NOT EQUIPPED
001-3-72 NOT EQUIPPED
001-3-73 NOT EQUIPPED


END
<

RE: Hello everyone, I want command t

It seems that the TMU board at 1-0-10 (boardid 102) has a problem, try to reseat the board to see if it helps.
These commands may help too:

RFBOI:BPOS=1-0-10;
Y;
BLDBE:BPOS=1-0-10, ALLFM=YES;

/Daddy

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

(OP)
More than 5 times i have seen red light on this card.
When reach my office i will run this command


Thanks for support

RE: Hello everyone, I want command t

(OP)
please check result after ran:
RFBOI:BPOS=1-0-10;
Y;
BLDBE:BPOS=1-0-10, ALLFM=YES;


<CNLIP:DEV=YES, LIM=ALL;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A STANDBY
B EXECUTING 0 ACTIVE
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 10466 KB 10466 KB
BUAR1 4111 KB BUAR2 3185 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 PASSIVE
001-0-20 117 32 ACTIVE
001-0-30 117 32 ACTIVE
001-0-40 118 32 ACTIVE
001-0-50 121 32 ACTIVE
001-0-60 42 32 ACTIVE
001-0-70 NOT EQUIPPED
001-0-71 NOT EQUIPPED
001-0-72 NOT EQUIPPED
001-0-73 42 1 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 117 32 PASSIVE
001-1-30 118 32 ACTIVE
001-1-40 118 32 ACTIVE
001-1-50 124 12 ACTIVE
001-1-52 NOT EQUIPPED
001-1-53 NOT EQUIPPED
001-1-60 42 32 ACTIVE
001-1-70 NOT EQUIPPED
001-1-71 NOT EQUIPPED
001-1-72 NOT EQUIPPED
001-1-73 42 1 ACTIVE
001-2-00 NOT EQUIPPED
001-2-01 NOT EQUIPPED
001-2-02 NOT EQUIPPED
001-2-03 NOT EQUIPPED
001-2-10 106 16 ACTIVE
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 124 12 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 118 32 ACTIVE
001-2-40 118 32 ACTIVE
001-2-50 118 32 ACTIVE
001-2-60 118 32 ACTIVE
001-2-70 NOT EQUIPPED
001-2-71 NOT EQUIPPED
001-2-72 NOT EQUIPPED
001-2-73 NOT EQUIPPED
001-3-00 NOT EQUIPPED
001-3-01 NOT EQUIPPED
001-3-02 NOT EQUIPPED
001-3-03 NOT EQUIPPED
001-3-10 NOT EQUIPPED
001-3-11 NOT EQUIPPED
001-3-12 NOT EQUIPPED
001-3-13 NOT EQUIPPED
001-3-20 NOT EQUIPPED
001-3-21 NOT EQUIPPED
001-3-22 NOT EQUIPPED
001-3-23 NOT EQUIPPED
001-3-30 102 32 ACTIVE
001-3-40 118 32 ACTIVE
001-3-50 118 32 ACTIVE
001-3-60 118 32 PASSIVE
001-3-70 NOT EQUIPPED
001-3-71 NOT EQUIPPED
001-3-72 NOT EQUIPPED
001-3-73 NOT EQUIPPED


END


Still there is red light on TMU

RE: Hello everyone, I want command t

Did you reseat the board like I told you?

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

(OP)

No, because i don't know to do that.


Thanks

RE: Hello everyone, I want command t

TMU board doesn't have leds!!!!

RE: Hello everyone, I want command t

activenew, to reseat the board (in this case 1-0-10) you withdraw it from the magazine then push it back in to do a power off reset.

RE: Hello everyone, I want command t

the board with LEDs are LPU5 or HDU7 not a TMU

RE: Hello everyone, I want command t

TMU/12 does have an LED on the front as do TLU83, ELU31, ELU33 and ELU34.

RE: Hello everyone, I want command t

Hi activenew,
there was no need for that really, most of us know that boards in the classic magazine have LEDs it was inexperienced posters trying to "help" who have confused the issue.
The light is an indicator that the board is out of service as shown in the BLFDP.
Have you tried to reseat the board as suggested by whosrdaddy?

RE: Hello everyone, I want command t

(OP)
thanks himdp for your support,

I know himdp you don't need this screenshot , but this for me to clearify my confused
as of you know my knowledge not much in this filed ,please be patient , i will upload another picture to clarify me where this board? I think this a chance to understand this system.


Thanks

RE: Hello everyone, I want command t

The TMU is a Tone and Multi Party (conference) Unit. It has no connection to the MDF as it is purely a system resource.
To reseat the board you must go to the board shown in picture 1 and loosen the top and bottom screws with a torx screwdriver.
Using the lower tab on the card, lever the board from the magazine just far enough to diconnect the rear connector (the red light will go out).
Now gently push the board back into the magazine. After a short initialisation period the red light should go out. Do a BLPDP and hopefully the board will show as active.

RE: Hello everyone, I want command t

(OP)

I will try to reseat the board , i will feedback the result.

Thanks for your help.

RE: Hello everyone, I want command t

(OP)


could please provide me command to get Ext connected with this Board(1-0-10), because if i get the ext number i can find board location
then reseat it.


RE: Hello everyone, I want command t

Did you read what himdp wrote?
I suspect that english is not your mother language (nor is it mine) but are you serious?
It is really simple, the board with the RED led labeled TMU must be reseated (procedure explained in detail by himdp)??

It is this board (red circle)



/Daddy

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

(OP)
yes,you are correct my mother language not English.

I got confused, I have called the second picture "Pic 1" in my computer before attaching it to you, for this reason, considered "himdp" to talk about these screenshot.

and thank you "whosrdaddy" to clarify the confusion.

RE: Hello everyone, I want command t

(OP)

I have Reseat the Board ,The Green color has worked for short time and then again back to red.

RE: Hello everyone, I want command t

(OP)
any idea guys?

RE: Hello everyone, I want command t

2 options:
- the board is faulty
- there is a problem with the magazine

Do you have a spare TMU board?

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

Thanks for stepping in there daddy.
There are three TMU boards in this LIM, if you are able you could swap the TMU in mag 0 with the one in mag 3 for example and see if the fault goes with the board or the magazine position.

RE: Hello everyone, I want command t

(OP)

Hello all,

Do i need any confiuration or just swap it?

Is this board cause a problem in receiving calls?

Thanks

RE: Hello everyone, I want command t

No configuration, just swap it.
normally it should not cause any problem concerning receiving calls.

/Daddy

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

(OP)

I think the TMU board is active now:


END
<CNLIP:DEV=YES, LIM=ALL;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A STANDBY
B EXECUTING 0 ACTIVE
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 10466 KB 10466 KB
BUAR1 4111 KB BUAR2 3185 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 ACTIVE
001-0-20 117 32 ACTIVE
001-0-30 117 32 ACTIVE
001-0-40 118 32 ACTIVE
001-0-50 121 32 ACTIVE
001-0-60 42 32 ACTIVE
001-0-70 NOT EQUIPPED
001-0-71 NOT EQUIPPED
001-0-72 NOT EQUIPPED
001-0-73 42 1 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 117 32 PASSIVE
001-1-30 118 32 ACTIVE
001-1-40 118 32 ACTIVE
001-1-50 124 12 ACTIVE
001-1-52 NOT EQUIPPED
001-1-53 NOT EQUIPPED
001-1-60 42 32 ACTIVE
001-1-70 NOT EQUIPPED
001-1-71 NOT EQUIPPED
001-1-72 NOT EQUIPPED
001-1-73 42 1 ACTIVE
001-2-00 NOT EQUIPPED
001-2-01 NOT EQUIPPED
001-2-02 NOT EQUIPPED
001-2-03 NOT EQUIPPED
001-2-10 106 16 ACTIVE
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 124 12 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 118 32 ACTIVE
001-2-40 118 32 ACTIVE
001-2-50 118 32 ACTIVE
001-2-60 118 32 ACTIVE
001-2-70 NOT EQUIPPED
001-2-71 NOT EQUIPPED
001-2-72 NOT EQUIPPED
001-2-73 NOT EQUIPPED
001-3-00 NOT EQUIPPED
001-3-01 NOT EQUIPPED
001-3-02 NOT EQUIPPED
001-3-03 NOT EQUIPPED
001-3-10 NOT EQUIPPED
001-3-11 NOT EQUIPPED
001-3-12 NOT EQUIPPED
001-3-13 NOT EQUIPPED
001-3-20 NOT EQUIPPED
001-3-21 NOT EQUIPPED
001-3-22 NOT EQUIPPED
001-3-23 NOT EQUIPPED
001-3-30 102 32 ACTIVE
001-3-40 118 32 ACTIVE
001-3-50 118 32 ACTIVE
001-3-60 118 32 PASSIVE
001-3-70 NOT EQUIPPED
001-3-71 NOT EQUIPPED
001-3-72 NOT EQUIPPED
001-3-73 NOT EQUIPPED


END
<CNLIP:DEV=YES, LIM=ALL;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A STANDBY
B EXECUTING 0 ACTIVE
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 10466 KB 10466 KB
BUAR1 4111 KB BUAR2 3185 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 ACTIVE
001-0-20 117 32 ACTIVE
001-0-30 117 32 ACTIVE
001-0-40 118 32 ACTIVE
001-0-50 121 32 ACTIVE
001-0-60 42 32 ACTIVE
001-0-70 NOT EQUIPPED
001-0-71 NOT EQUIPPED
001-0-72 NOT EQUIPPED
001-0-73 42 1 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 117 32 PASSIVE
001-1-30 118 32 ACTIVE
001-1-40 118 32 ACTIVE
001-1-50 124 12 ACTIVE
001-1-52 NOT EQUIPPED
001-1-53 NOT EQUIPPED
001-1-60 42 32 ACTIVE
001-1-70 NOT EQUIPPED
001-1-71 NOT EQUIPPED
001-1-72 NOT EQUIPPED
001-1-73 42 1 ACTIVE
001-2-00 NOT EQUIPPED
001-2-01 NOT EQUIPPED
001-2-02 NOT EQUIPPED
001-2-03 NOT EQUIPPED
001-2-10 106 16 ACTIVE
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 124 12 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 118 32 ACTIVE
001-2-40 118 32 ACTIVE
001-2-50 118 32 ACTIVE
001-2-60 118 32 ACTIVE
001-2-70 NOT EQUIPPED
001-2-71 NOT EQUIPPED
001-2-72 NOT EQUIPPED
001-2-73 NOT EQUIPPED
001-3-00 NOT EQUIPPED
001-3-01 NOT EQUIPPED
001-3-02 NOT EQUIPPED
001-3-03 NOT EQUIPPED
001-3-10 NOT EQUIPPED
001-3-11 NOT EQUIPPED
001-3-12 NOT EQUIPPED
001-3-13 NOT EQUIPPED
001-3-20 NOT EQUIPPED
001-3-21 NOT EQUIPPED
001-3-22 NOT EQUIPPED
001-3-23 NOT EQUIPPED
001-3-30 102 32 ACTIVE
001-3-40 118 32 ACTIVE
001-3-50 118 32 ACTIVE
001-3-60 118 32 PASSIVE
001-3-70 NOT EQUIPPED
001-3-71 NOT EQUIPPED
001-3-72 NOT EQUIPPED
001-3-73 NOT EQUIPPED





RE: Hello everyone, I want command t

yes, it seems ok now.

Case closed.

/Daddy

-----------------------------------------------------
Helping people is my job...

RE: Hello everyone, I want command t

(OP)
Thanks for all

Also i want say thanks for himdp.

RE: Hello everyone, I want command t

You're welcome.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close