Adding dlc operator Adding dlc operator jgreen17 (TechnicalUser) (OP) 18 Aug 16 00:31 After I add another operator extension and do a store all will the system reboot and loose calls and for how long if yes? Thanks RE: Adding dlc operator TouchToneTommy (Vendor) 18 Aug 16 17:45 System will reboot, it's usually about a minute. If the lines assigned to the existing DLC are in any kind of oddball order, they will be reset to default on both positions, so be prepared to maybe do some additional programming. BACKUP to the PC card before you change anything, so you can go back if need be. RE: Adding dlc operator jgreen17 (TechnicalUser) (OP) 18 Aug 16 20:57 So if I have 5 existing dlc operator positions that have lines and features scattered about on 28 button sets after I add the sixth dlc I will need to reprogram the existing dlc extensions too? Thanks RE: Adding dlc operator TouchToneTommy (Vendor) 18 Aug 16 23:10 Yup, sucks, but the DLC's will default the line assignments and positions. Make notes before you begin, and remember how lines are assigned, in what order, and on what buttons.