INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

CISCO WIRELESS AIR-CAP3602I-E-K9

CISCO WIRELESS AIR-CAP3602I-E-K9

(OP)
Hellooow Team I need to log in via web browser on that Cisco wireless AIR-CAP3602I-E-K9 ,,So what is the default IP address?
To me I have use 192.168.0.100 it fails to log in...

RE: CISCO WIRELESS AIR-CAP3602I-E-K9

If it still has the lightweight software installed then you can only enable Telnet/SSH access via the Wireless Controller it is registered to. If it has been converted to Autonomous mode AND it has been defaulted then it should pick up an IPv4 address through DHCP and you should be able to logon to it with username 'Cisco' and password 'Cisco'.
The 3502 has a console port as well so you could try logging on via an ASYNC terminal.

Andy

RE: CISCO WIRELESS AIR-CAP3602I-E-K9

(OP)
ADB100
What if I can use Serial to enter in and press escape key when it boot until to have default IP,,,,this is just like when Iam using via CLI.....?

RE: CISCO WIRELESS AIR-CAP3602I-E-K9

(OP)
Hellow ADB 100

I tried to connect through our network also what I observed it peak the IP Address ....192.168.1.21 on our network ,,but what I thought it take it and I tried to use web browser and put that ip it failssss.....

secondly I connected via console but it brought ......seee wht it says on my attachment ,,,,


Before also tried to use via web by put 10.0.0.5 it reply and start to open but once Iam trying to connect it it disconnect.....

RE: CISCO WIRELESS AIR-CAP3602I-E-K9

Hi, this AP has lightweigh CAPWAP software installed on it so needs a Wireless LAN Controller to operate. I can't work without one.
You can convert it to Autonomous mode with the correct IOS image though and then it can work on its own (Autonomous...).

Andy

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close