Help please. Paging issues. Help please. Paging issues. ValleyTelecom (Programmer) (OP) 25 Aug 15 19:00 Using analog extension port and Bogen WMT-1A to a pagepac. Was told by Bogen I need a UTI-1. Is this correct? I did hook up the WMT unit and don't get a busy, but I hear nothing through horn. Thanks! RE: Help please. Paging issues. TouchToneTommy (Vendor) 25 Aug 15 20:13 Is the pagepac a modular connection for the input? A lot of pagepac equipment need the audio on the Green/Red and a contact closure on the Black/Yellow. If you're not using BGM, you may be able to just strap Black to Yellow RE: Help please. Paging issues. ValleyTelecom (Programmer) (OP) 26 Aug 15 03:44 Thank you Tommy. Used a Viking RAD unit, connected analog extension port to the "phone in" and the 600ohm out to the PagePac 6. I did need to short out the black/yellow pairs to function. Then programmed a DSS button "dial ICM page" for that extension. Works like a charm! I will remember this procedure for future installs, what a relief. Once again, much appreciate ya..