static routes static routes billyj1900 (MIS) (OP) 22 Aug 14 21:09 I am trying to ping 192.168.1.1 on Router 1 from router 3 and I am not seeing what I am missing. I am trying to use static routes. https://drive.google.com/folderview?id=0B5CZXDXaQgUPc2RyVVlIUzFxQWs&usp RE: static routes VinceWhirlwind (TechnicalUser) 23 Aug 14 03:43 Try pinging router3 from router1: what ip address are you trying to ping? Does Router1 have this IP in its routing table? RE: static routes billyj1900 (MIS) (OP) 23 Aug 14 07:46 Cant ping Router 3 from Router 1. I am trying to ping 192.168.1.1 which is F0/0 on router 1 from router 3. Router 1 is just there representing an inside interface of a FW. RE: static routes imbadatthis (TechnicalUser) 23 Aug 14 12:33 unless im blind, R1 has no routes to any other subnet. so it will only know about 192.168.1.0/24 so even if anything comes back to R3 , R1 wouldn't know where to send back. R2 doesn't actually need any routes in this situation since it knows both about R1 and R3 R3 routing table looks like it should work. .. so either add a default route to R1 .. or add the correct route.. cheers. We must go always forward, not backward always up, not down and always twirling twirling towards infinity. RE: static routes billyj1900 (MIS) (OP) 23 Aug 14 12:48 can you explain what you mean about the correct route? RE: static routes imbadatthis (TechnicalUser) 23 Aug 14 20:02 ip route 0.0.0.0 0.0.0.0 192.168.1.253 OR: ip route 10.0.1.0 255.255.255.0 192.168.1.253 ip route 10.1.10.0 255.255.255.0 192.168.1.253 ip route 10.1.20.0 255.255.255.0 192.168.1.253 ip route 10.1.30.0 255.255.255.0 192.168.1.253 ip route 10.1.40.0 255.255.255.0 192.168.1.253 We must go always forward, not backward always up, not down and always twirling twirling towards infinity.