1416 phone set question 1416 phone set question bcmfiftyfan (Programmer) (OP) 18 May 14 12:18 Hello, what does the letter G in the display of a 1416 telephone represent? RE: 1416 phone set question 2 TouchToneTommy (Vendor) 18 May 14 15:59 Phone Status Letters The series of letters that appear in the top left of the display are used to indicate the status of various features. idle display • B = Barred A B is shown on your phone's display when the system administrator has set you to outgoing call barred status. You will only be able to make internal calls while this is applied. • D = Diverting (Forwarding) Calls A D is shown on your phone's display when you have forward unconditional enabled. • G = Group Member (In Group) A G is shown on your phone's display when have been configured as a member of a hunt group and your membership is enabled. While this is the case, you may receive calls targeted to the hunt group. • N = No Calls (Do Not Disturb) An N is shown on your phone's display when you have do not disturb enabled. • O = Out of Service An O is shown on your phone's display when any of the groups of which you are enabled as a member is set to night service mode. In that mode calls to that group are diverted to its fallback if set or otherwise to voicemail if available. • T = Twinned A T is shown on a phone's display if it is internally twinned with your phone. Calls to you will alert on both phones and can be answered by you at either phone. • S = System Alarm If you are configured as a system administrator, an S in the phone's display indicates a system alarm. RE: 1416 phone set question bcmfiftyfan (Programmer) (OP) 18 May 14 21:21 Thanks!