changing screen size changing screen size kotharikailash (Programmer) (OP) 28 Dec 12 00:58 Hi, Is there a way to change screen size to 120 columns ( more than 80) inside a clipper app? Thanks RE: changing screen size TonHu (Programmer) 28 Dec 12 05:24 By using the CODEMODE CON COLS=x LINES=y command before starting your application, or using the CODESETMODE(y,x) function from your app, and using the MAXROW/MAXCOL functions where appropriate. RE: changing screen size kotharikailash (Programmer) (OP) 29 Dec 12 07:57 I have already tried this. When I give mode con cols=120 from a command prompt it does increases the window size. But within the app, it comes back to normal 25x80. setmode(25,120) or 24x120 also does not work. Do I need to do any setting for video driver etc. Thanks RE: changing screen size EzLogic (Programmer) 29 Dec 12 09:21 hit ctrl-enter on the dos prompt Ali Koumaiha TeknoSoft Inc. Michigan RE: changing screen size kotharikailash (Programmer) (OP) 1 Jan 13 07:17 it doesnt work. maxcol() gives 79 only whichever way I try. I think clipper can not address more then 80 cols. it does work for 40 cols though. :( Thanks for suggestions.