INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

R8.0 9508 CID not showing

R8.0 9508 CID not showing

(OP)
Hiya folks,

Put my first R8.0(43) system (key mode) in yesterday and also my first batch of 9508 system phones, using two combo cards.

On my R7 installs with the 1400 series phones, caller ID works as expected, CID information is displayed on ringing phones. On the R8 with 9508, inbound calls only show "EXTERNAL" adjacent to the line button and there is no CID infor anywhere on the display. Am I missing something obvious? I had very little time on site with the system (emergency raplacement of failed ACS 7.0) and the customer is happy, but I am perplexed.

Bill

RE: R8.0 9508 CID not showing

Try impedence matching the lines. If that doesn't do it, try setting the gains to -.5 for each line.

RE: R8.0 9508 CID not showing

You could also try going into System->Telephony->Tones & Music and changing the CLI type. If you are in the US, it should be set to FSK BELL 202.

Dan

When in doubt, just keep upgrading! LOL :)

RE: R8.0 9508 CID not showing

Sorry, I just realized you are in Partner/Basic mode. Unfortunately, they don't have the CLI type option in that mode. Make sure Trunk Type is Loop Start ICLID, and you could try putting a check under Long CLI Line.

Dan

When in doubt, just keep upgrading! LOL :)

RE: R8.0 9508 CID not showing

(OP)
I may be imagining things, but I could swear the CID information was available in the call logs, just not on the main screen when the incoming call rings. I have to be back at the site today or monday and will check. Can anybody confirm that the 9508 will show CID information for th incoming calls on the main screen? I don't even see where it would show up, as there is no room in the button area and the top three lines show the time, date, menu level, etc. Screenshot of an inbound call with CID anybody?

RE: R8.0 9508 CID not showing

It'll show it where the name normally appears. It replaces the name with the caller id telephone number. If available, below that line and above the a=/line 1 line will appear the name of the caller.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close