SMS from clipper app SMS from clipper app kotharikailash (Programmer) (OP) 8 Jul 12 01:50 Is there a utility available for sending sms to mobile phone from a clipper app, with or without using the bulk-sms software. Thanks RE: SMS from clipper app EzLogic (Programmer) 8 Jul 12 06:52 there are sime winsock library for clipper. sending a text can be the same as sending an email. you need to find out the gateway of the carrier. if in the US, for example, sprint's text message is: firstname.lastname@example.org verizon, is email@example.com, tmobile, is firstname.lastname@example.org ypou can google the carrier's gateway.. Ali Koumaiha TeknoSoft Inc. Michigan RE: SMS from clipper app JockMullin (MIS) 9 Jul 12 09:11 As Ali stated, it is really just a matter of sending an email for many carriers. I email from within clipper/xharbour using the venerable blat program (free), which works quite well via SMTP and is small enough to invoke by RUNing from within most clipper apps. Jock RE: SMS from clipper app kotharikailash (Programmer) (OP) 17 Aug 12 01:43 Thanks Ali, thanks JockMullin. Got busy with some other work. Now started working on it. I connected my cell phone to the PC and able to see its modem configured on a com port. Thru Hyper-terminal I am able to send SMS also. Now this has to be automated thru the clipper app. I am finding problems in writing to com port thru tmy app. The error message is 'ACCESS DENIED". I am using fopen, fwrite, ferror functions. Can any one please help. Thanks RE: SMS from clipper app EzLogic (Programmer) 18 Aug 12 09:57 I remember when i used to write Clipper apps, i used to use modems plenty of times and i wrote my own terminal system (similar to ProCom Plus) i don't know if anyone remembers that. Anyhow, i used a library called Telepathy that was perfect for using modems and dialing etc.. http://www.extrasensory.com/telepathy.htm I don't know if they still able to sell you or give you a demo of the lib... or if you can find it to download it and purchase it. Ali Koumaiha TeknoSoft Inc. Michigan RE: SMS from clipper app kotharikailash (Programmer) (OP) 28 Dec 12 00:37 I found gnokii's command line interface for sending SMS very useful.