Smart questions
Smart answers
Smart people
Join Tek-Tips Forums

Member Login

Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Jobs from Indeed

Link To This Forum!

Partner Button
Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

Help Interface E1 BCM50 - Part Number for use in Brazil

actec (TechnicalUser) (OP)
21 Jun 12 23:03
I need a help with a BCM50e version 2.
I need the part number of the E1 interface with MFC R2 signaling for this PBX.
WilI l be installed in Brazil
Is there an installation manual for this interface?
Thanks for the help

Jose Aranha
curlycord (Programmer)
22 Jun 12 9:58




actec (TechnicalUser) (OP)
23 Jun 12 16:17

Thank you for your help.
I found the interface in Mexico. And this, right now I need to see how to import the part.
Thank you so much .... If you need, just call me ... goodbye
actec (TechnicalUser) (OP)
13 Aug 12 16:13

Hello Curlycord.
Thank you for your help.
I bought the board E1 R2MFC in Mexico.
Except that I have a problem, the BCM50 R2 does not recognize the E1 interface.
I install it in the first Cabinet expansion, turn all over again. I open the BEM, I go to phone features, and the E1 module does not appear in the first Cabinet expansion. Can I send you the screen you want to see.
My model is a BCM50 with Router (BCM50e).
Software Release:
Hadware code: NT9T5508.
Funny thing is that it appears like country: North america, I believe that Brazil should appear.
You think you can update the software center from R2 to R3 or R5?
Thanks again for your help.

curlycord (Programmer)
13 Aug 12 16:59
Sounds like you need to reset BCM , chose the correct profile and program from scratch....somebody here hopefully can verify that.


actec (TechnicalUser) (OP)
13 Aug 12 17:11
Ok. I think I have to see how to reset the BCM50. Never did that. I can JUDr with that? is there any document that talk about how to reset total?
BlueStuff (Programmer)
16 Aug 12 8:55
You have to "cold reset telephony services"
There you find the localization settings.
All telephony programming will be erased.

Administrator – Utilities – Cold reset.

In the Telephony resources. Expansion: select DTM-PRI.
actec (TechnicalUser) (OP)
16 Aug 12 12:35
Hello BlueStuff.
Thank you for your help.I perform this task this coming Saturday ... Then put the result
actec (TechnicalUser) (OP)
4 Oct 12 14:59
Hello Bluestuff. Hello everybody ... The reset worked and I was able to configure the BCM BRAZIL.
The E1 interface, coming from Mexico, was recognized this and synchronized with the provider. The problem is now set in the BCM so the phones are able to pick up lines, the E1, to dial out. I do not know configure this interface, can someone give me a light? grateful.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close