INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

SSG5 Problem defining DST NAT and SRC NAT

SSG5 Problem defining DST NAT and SRC NAT

(OP)
SSG5 6.1 - Public Server IP Addr 68.16.86.93 Untrust SSG5 Port E0/0 IP 68.16.86.92  Trusted SSG5 Port E0/1 40.40.140.8 Internal Server 40.40.140.244  Trying to NAT external 68.16.86.93 to Internal 40.40.140.244. Allow any external address. NAT SRC address to Internal 40.40.140.8.  Frustrated as I cant get the Policy working. Config Pasted Below -  thx

set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set service "1X Portal Custom" protocol tcp src-port 0-65535 dst-port 0-65535
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "administrator"
set admin password "nHEIJ+r2OyRKcmxFYsLP7BGtYiGagn"
set admin auth web timeout 30
set admin auth dial-in timeout 3
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "MGT" block
set zone "DMZ" tcp-rst
set zone "VLAN" block
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "Trust"
set interface "wireless0/0" zone "Trust"
set interface "bgroup0" zone "Trust"
set interface bgroup0 port ethernet0/2
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface ethernet0/0 ip 68.16.86.92/27
set interface ethernet0/0 route
set interface ethernet0/1 ip 40.40.140.8/24
set interface ethernet0/1 route
set interface wireless0/0 ip 192.168.2.1/24
set interface wireless0/0 nat
set interface bgroup0 ip 192.168.1.1/24
set interface bgroup0 nat
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet0/0 ip manageable
set interface ethernet0/1 ip manageable
set interface wireless0/0 ip manageable
set interface bgroup0 ip manageable
set interface ethernet0/0 manage ping
set interface ethernet0/0 manage snmp
set interface ethernet0/0 manage web
unset interface ethernet0/1 manage ssh
unset interface ethernet0/1 manage telnet
unset interface ethernet0/1 manage ssl
set interface bgroup0 manage mtrace
set interface wireless0/0 dhcp server service
set interface bgroup0 dhcp server service
set interface wireless0/0 dhcp server auto
set interface bgroup0 dhcp server auto
set interface wireless0/0 dhcp server ip 192.168.2.33 to 192.168.2.35
set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.34
unset interface wireless0/0 dhcp server config next-server-ip
unset interface bgroup0 dhcp server config next-server-ip
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set interface wireless0 wlan 0
set flow tcp-mss
unset flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set address "Trust" "Internal 1x mobile" 40.40.140.244 255.255.255.0 "Internal 1x mobile "
set address "Trust" "Web Address for 1X Portal" 68.16.86.93 255.255.255.224 "Public addr for AASC 1X"
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
set url protocol websense
exit
set policy id 1 from "Trust" to "Untrust"  "Any" "Any" "ANY" permit
set policy id 1 disable
set policy id 1
exit
set policy id 2 from "Untrust" to "Trust"  "Any" "Web Address for 1X Portal" "1X Portal Custom" nat src dst ip 40.40.140.244 permit
set policy id 2
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
unset license-key auto-update
set wlan 0 channel auto
set wlan 1 channel auto
set ssid name "AASC SSG5 Wireless"
set ssid "AASC SSG5 Wireless" authentication open encryption none
set ssid "AASC SSG5 Wireless" interface wireless0
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
set route 68.16.86.93/27 vrouter "trust-vr" preference 20 metric 1
exit
set vrouter "trust-vr"
set source-routing enable
unset add-default-route
set route 68.16.86.93/27 interface ethernet0/1 gateway 40.40.140.7
set route source 68.16.86.93/27 interface ethernet0/0 gateway 68.16.86.65
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
 

RE: SSG5 Problem defining DST NAT and SRC NAT

You need to configure the public IP address using the MIP (Mapped IP) function on the E0/0 interface, if that is your gateway. Have you read the documentation? You might want to post the webui version of the policies, it may be easier to read them instead of searching thru the CLI listing of the config.

....JIM....

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close