I have a 2Mb connection with a carrier using PRI ISDN. And the carrier is asking me to send them the numer.

I remember that in the CDB FTR_DATA you can create a table and send the number you need.

I have been tryin to create a new table but I do not now how to modify UNKN* so i can inserte the numbers that the carrier needs.

TYPE FTR_DATA
CUST 00
TBL  
**DAPC**PREFIX TABLE NO: 00 **
      UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*                                           
E164*       00    0                             
PRIV*                                           
E163*       00    0                             
TELX*                                           
X121*                                           
NATL*                            

Does anyone know how to insert the numbers in this table???

if you monitor the dchannel, what do you see going out?

look in LD 15 under
NET_DATA
CLID yes
 
ENTRY 0
  HNTN
  ESA_HLCL
  ESA_INHN NO
  ESA_APDN YES
  HLCL
  DIDN NO
  HLOC
  LSC
  CLASS_FMT DN

 

I am leaning towards hawks post.  I thought DAPC was just for inserting a digit in front of what the user sees, so they can call it back without adding a 9, or whatever your outside line access number is.

DAPC: Display Access Prefix on CLID

--
Nortel Resources at GHTROUT.com World Famous!
--

So how do you chenge that table and were do you put the number, now the carrier is asking me to put a 10 digit number like a caller_id, can this be done?

hawks posted that.  It is in LD15

Here is the complete guide to Caller ID:  http://www.ghtrout.com/files/CLID_Documentation_from_Nortel.zip

 

--
Nortel Resources at GHTROUT.com World Famous!
--

I will take a look at it and let you know