INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!

Talk With Other Members
Be Notified Of Responses
To Your Posts
Keyword Search
One-Click Access To Your
Favorite Forums
Automated Signatures
On Your Posts
Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

LINK TO THIS FORUM!

Tek-Tips LinkedIn^® Group

Join our
LinkedIn^® Group!

Hook up with past and present colleagues and classmates quickly.

Partner With Us!

"Best Of Breed" Forums Add Stickiness To Your Site

(Download This Button Today!)

Feedback

"...Praise should be given to the Forum managers or the Tipmasters - they are what make it work - give them extra recognition!!! They are timely (prompt - unlike ACTUAL support sites) and on the ball!!!..."

More...

Geography

Where in the world do Tek-Tips members come from?

Click Here To Find Out!

Tek-Tips Shirts!

Get your
Tek-Tips Forums
SWAG here!

Home > Forums > Wiring Closet > Phone Systems > Siemens: Hicom Forum

Upgrading an STMI2 or HG1500 Card by means of CLI

Read More Threads Like This One

skifisher (IS/IT--Management)

15 Mar 12 16:57

I have the FTP?TFTP server running.
Does anyone know what to put into these fields during the CLI Upgrade?

inet on ethernet (e): <IP addr. of HG1500 V3 incl. subnet mask in hex (e.g 192.1.110.132:ffffff00)>
inet on backplane (b):

The card was already flashed and has no IP Address. I have the mac address.

cody64 (Vendor)

2 Apr 12 5:05

Hi Skifisher,

Here are the fields and meanings.

First the boot parameters have to be changed using 'c' command;

This command asks for a lot of parameters (please enter the following values):
boot device        : emac0 (means LAN Interface)
processor number    : 0  (stay as it is)
host name        : <optional:name of host where TFTP server runs>
file name        : HG15.30.006
inet on ethernet (e)    : <IP address of HG1500 inclusive subnet mask in hex-mode (e.g 192.1.110.132:ffffff00)>
inet on backplane (b)    :
host inet (h)        : <IP address of host where TFTP server runs>
gateway inet (g)    : <optional: IP-address of the default gateway for reaching the host>
user (u)        :
ftp password (pw) (blank = use rsh):
flags (f)        : 0x80 (use of TFTP)
target name (tn)    : <optional: logical name of HG1500>
startup script (s)    :
other (o)        : emac

When the BOOT parameters are set enter the command "z" to save the boot parameters.

Hope this helps.

If the card is already flashed then you may be able to set the IP via the v24 interface on the card. It can be done by command line. If you connect and can log in, there is onboard help which will give you the relevant commands and structure.

Cody64.

Siemensgeezer (TechnicalUser)

22 May 12 11:20

TO log into the card directly via serial interface

35xx baud rate 9600-19200
38xx baud rate 19200-38400

Connect via Hyper terminal

press return

Username:(enter username for Hipath system)
Password:(enter pw for hipath system)

Command:get write access
command:set ip address 192.xxx.xxx.xxx
command:set ip subnet 25.255.255.0
Command:save config
Command:(Now Press Control + X)

The Hg1500 card now reboots and will come back with the settings you have provided.

I have always found that this is the best way to set up the card with basic settings then enabling you to play within the windows enviroment:)

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Back To Siemens: Hicom