PRI out dial timer ?

ringbacktone · Feb 22, 2012

I have a customer that has complained about the new PRI service
returning fast busy too fast. If user dials 9,xxx, then pauses
to look at last 4 digits of number, re-order tone is returned in 3/4 seconds. I am not aware of any end of dial timer to adjust. Does any one have a fix or adjustment for this.

Thanks in advance,

RBT

ironhorse17 · Feb 22, 2012

There is end of dial and inter digit timer.

silver987 · Feb 22, 2012

If you go to system programing, under dialing plan you will find dial timeout. Default is set to 4.

Wayne T

ringbacktone · Feb 22, 2012

Thank you very much, have been working on Norstars a long time, just not much with PRI s,T1's etc. Chg dialing plan from 4 to 8 seems to have fixed it. You guys and forum are most valuable to " Geezer techs" like me. Have a great day.

norstarboy125 · Feb 25, 2012

I always set my dest code to 9 and any, that way it never times out. You could look for the remaining numbers for 10 mins and it still won't time out.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

ringbacktone · Feb 26, 2012

Thanks to the forum techs for the input. I will have a much easier time getting the job done next time.

RBT

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

PRI out dial timer ?

ringbacktone

Technical User

ironhorse17

Technical User

silver987

Vendor

ringbacktone

Technical User

norstarboy125

Vendor

ringbacktone

Technical User

Similar threads

Part and Inventory Search

Sponsor