Mitel 3300 ResetLoginPassword command

thread1329-1561128


**********************************************
What's most important is that you realise ... There is no spoon.

Thanks kwbMitel. The remove file option does not work as I am in version 5.5. There are apparently other commands
Thanks for your help

on 5 you should use:

Reset_All_Login_Passwords

from the RS232 cable

Mitelmatt

It is telling me:


-> Reset_All_Login_Passwords
undefined symbol: Reset_All_Login_Passwords

I have printed the version for you

-> version
VxWorks (for Mitel Embedded PPC83XX F100) version 5.5.2.
Kernel: WIND version 2.6.
Made on Jan 21 2010, 17:31:47.
Boot line:
ata=0(0,0):/partition4/RTC8260 e=192.168.11.2:ffffff00 h=. g=192.168.11.4 u=. pw=. o=qefcc
value = 102 = 0x66 = 'f'
->
Thanks for your help. I am kind of lost

This is what the documentation says: The command is entered as RESET_ALL_LOGIN_PASSWORDS "username" from the Maintenance Terminal connected to the RS-232 port and as ResetAllLoginPasswords (no underscores) from the RTC shell (Telnet port 2002).

Amazing. I just cannot get it to worl. I dont have the telnet 2002 port password either

Will keep on waiting for more suggestions.

use system and sx2000 to log on to the port 2002 interface then use the command given above, I have used this with success but not managed to get the other one working

Use quotes "" around the command i.e. "Reset_All_Login_Passwords

Thanks for all the help. The situation is (version (5.5):
- the reset commands such Reset_All_Login_passwords do not work on the console port
- I can access port 23 to the sx2000 interface
- I cannot access the telnet 2002 port because I dont have login/password

Any further ideas?

Thanks a lot

I don't have the version handy, but from the RS232 port, try:

ResetAllLoginPasswords

Cut and paste the results...

Thanks Irwin. I run the "version" command right after for you to see results

-> ResetAllLoginPasswords
undefined symbol: ResetAllLoginPasswords
-> version
VxWorks (for Mitel Embedded PPC83XX F100) version 5.5.2.
Kernel: WIND version 2.6.
Made on Jan 21 2010, 17:31:47.
Boot line:
ata=0(0,0):/partition4/RTC8260 e=192.168.11.2:ffffff00 h=. g=192.168.11.4 u=. pw=. o=qefcc
value = 102 = 0x66 = 'f'

try this:

lkup "Passwords"

what does that show?

ah.....try:

swrevs

The 5.5.2 looked odd to me, but I didn't clue in at first... that's not the 3300 software version, that's the VxWorks kernel version.

Irwin. i am travelling today. Will report as soon as I am back. Thank you

Irwin, please see below.


-> swrevs
Software version: 10.1.0.69_1
System relink: No relink has been applied.
Call Control relink: No relink has been applied.
value = 28 = 0x1c
->


No Commands with Password


-> lkup "Passwords"
value = 0 = 0x0
-> lkup "Password"
umGetUserPassword(char *) 0x0027a840 text
CSecurityManager:asswordDecrypt(unsigned char *, unsigned long, unsigned cha*) 0x00990d58 text
CSecurityManager:ecryptPassword(unsigned char *, unsigned long, unsigned cha*) 0x0099133c text
SM_Var_UserProfile::getPassword(void) const 0x01ccbf04 text
esm_GetPassword(void) 0x0098d21c text
sip_setPasswordInUrl 0x1177fbe4 text (SIP_SDK_link.out)
VMPasswordDetails::VMPasswordDetails(vvmPasswordParams &) 0x01197094 text
XA_General_Cmd::ValidatePasswordSubmit(basic_string<char, string_char_traits<cr>, __default_alloc_template<true, 0> > const &, basic_string<char, string_chatraits<char>, __default_alloc_template<true, 0> > &) 0x00c204bc text
validateLicenseAndPassword(void) 0x00c537c4 text
CvvmServerImpl::GetPasswordParams(vvmPasswordParams *) 0x01952c54 text
websGetPassword(void) 0x00277038 text
userProfilePasswordEncrypt(char const *, char *, int *) 0x00b3edb0 text
esm_GetPassword(int, websRec *, int, char **) 0x0098d1d4 text
XA_WAVDistributor::Handle_GenerateUsernamePassword(char *, char *) 0x00c32888 xt
RsSetMessagePassword 0x0300fcec data
VVM_GetPasswordWebVar(websRec *) 0x011bde48 text
CvvmSessionImpl::SetPassword(char *) 0x0194837c text
uwi_GetLoginIdAndPassword(int, websRec *, int, char **) 0x009a79f4 text
IvSetMessagePassword 0x0300fcc8 data
AuthParamEvent::SetPassword(char const *) 0x1121f418 text (SIP_SDK_link.ou
websGetRequestPassword(websRec *) 0x002825bc text
sdf_cbk_uaGetPrivateKeyPassword 0x11427434 text (SIP_SDK_link.out)
LoginAgent::esm_GetPassword(basic_string<char, string_char_traits<char>, __defau lt_alloc_template<true, 0> > const &) 0x0098956c text
websSetPassword(char *) 0x00276fe0 text
AuthParamEvent::GetPassword(void) const 0x112213ec text (SIP_SDK_link.out)
VMPasswordDetails::maxLength(void) 0x011970e8 text
PeerLookupEvent::SetPassword(char const *) 0x11245774 text (SIP_SDK_link.out )
VMPasswordDetails::setDetails(vvmPasswordParams &) 0x011970c4 text
SC_LOS_Form::m_IPOPPassword 0x035e96a4 bss
SacValidate512Password(char *) 0x0111e4d4 text
UpgradeUtils_ValidateLicenseAndPassword 0x00956418 text
VMVMSession::setPassword(char *) 0x011906dc text
PeerLookupEvent::GetPassword(void) const 0x11240afc text (SIP_SDK_link.out)
SC_LOS_Form::getCachedIPOPPassword(void) 0x01d0e0d4 text
CvvmServer::GetPasswordParams(vvmPasswordParams *) 0x0193af2c text
UserSecret::SetPassword(char const *) 0x115840b8 text (SIP_SDK_link.out)
UserSecret::GetPassword(void) const 0x1158408c text (SIP_SDK_link.out)
MiSSCmd::GetPassword(void) 0x0154c1ac text
esm_GetLoginIdAndPassword(char *, char *, basic_string<char, string_char_traits< char>, __default_alloc_template<true, 0> > &) 0x009b4f38 text
CvvmSession::IsPasswordSet(int *) 0x0193ca5c text
sip_getPasswordFromUrl 0x11781b7c text (SIP_SDK_link.out)
Upgrade_SWInstall::validateLicenseAndPassword(bool *) 0x0096ab88 text
SMWrap_getPassword(basic_string<char, string_char_traits<char>, __default_alloc_ template<true, 0> > &) 0x00a20c68 text
XA_WAVDistributor::GenerateUsernamePassword(void) 0x00c326fc text


Thanks for your help

Also, I do an "ls" at the prompt I get ResetAllLoginPasswords:


-> ls
3300SW_TOC.txt
E2T8260
EnumFieldData.dat
install
RTC8260
ResetAllLoginPasswords
DspConfig
globalization
LMTTestSignals
script
ESM_BrowseDlg_Applet
ESM_FTP_Applet
ESM_FTP_Client
ESM_FTP_Display
symbol
_swrevs
_swvariant
FtpProxyPort.txt
SpcVersions.txt
taskMonitor.txt
wdMonitor.txt
webs
bootrom.s3
post.hex
DSP_II_FPGA.hexout
3xxx_fpga.bit
3xxx_fpga_nl2.bit
bcm_cfe.bin
CXII_FPGA.xsvf
CXII_FPGA.txt
heavy_fpga.bit
kts_fpga.bit
lite_fpga.bit
msp430.s1
msp430NL2.s1
mxe_bcm_cfe.bin
mxe_fpga.bin
mxe_fpga.bz2
mxe_fpga.txt
mxe_msp430.s1
mxe_testrom.s3
mxe_testrom_cfe.bin
Dig_LargeSysAL_link.out
DIM_Module_link.out
SIP_SDK_link.out
JavaLayer_link.out
zoneinfo
tftp
value = 0 = 0x0

The command is entered as RESET_ALL_LOGIN_PASSWORDS "username" from the Maintenance Terminal connected to the RS-232 port and as ResetAllLoginPasswords (no underscores) from the RTC shell (Telnet port 2002

If you don't enter the username then it should do all of them...


You have tried with all uppercase because its case sensitive...