Smart questions
Smart answers
Smart people
Join Tek-Tips Forums
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login




Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Jobs from Indeed

Link To This Forum!

Partner Button
Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

comdial excutech no ring at stations for incoming calls.

nuetek (TechnicalUser) (OP)
12 Feb 12 11:06
comdial excutech have four lines with 5 phones/ incoming calls the light blinks but does not ring at any phone. please help
stsguy (Instructor)
14 Feb 12 16:20
ARE YOU FAMILIAR WITH THE PROGRAMMING?
 

WORK SMART NOT HARD

nuetek (TechnicalUser) (OP)
15 Feb 12 6:33
is it (ITCM) - (*)(7)(4)(6)(*) from station 10 ?
need to know if that is right and what next

The system is comdial executech 824 KSU it has 4 stations. station 10 does not have a display. all the phones are the same. ii have attached pic of phone

also non of the phones show their extension

also need to set up the intercom ring also

Thanks
stsguy (Instructor)
15 Feb 12 8:37
intercom *#746*. dial 54. dial 1. Select lines to ring using the A1-A14 buttons. A1 is the top left button, this would be line 1. dial # dial ext #. dial *** when done.

WORK SMART NOT HARD

nuetek (TechnicalUser) (OP)
15 Feb 12 12:44
ty
will try that out today. when i do the ring for station 10 do i still need to enter the ext.

how do i setup the night mode?

thank You

I was a member of this site about 2yrs ago. Always used it at my job. This site has always been extremely helpful and I have learned so much here. Just wanted to thank people like you that take the time help.
stsguy (Instructor)
15 Feb 12 16:47
YES, YOU HAVE TO ENTER THE STATION NUMBER. I DON'T THINK THAT OLD SYSTEM HAS A NIGHT SERVICE. YOU MAY HAVE TO USE CALL FWD

WORK SMART NOT HARD

TouchToneTommy (Vendor)
15 Feb 12 22:53
For an 824, you can download the manual here:
http://www.wedophones.com/Manuals/comdial/ExecuTech/ExecuTech%20II%20Model%20816-824.pdf

Look starting at page 60 for Station COS programming

At Ext. 10,

Intercom *746*
Dial the extension number that you want to program
Press 2
(At this point, ALL lines on that phone will be set to NO ring)
Press EACH line button that you want to make ring on the set
Press * when you are done with that extension

Dial another extension number, or press MONITOR to exit

 

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close