Panasonic Manintenance console Panasonic Manintenance console factor21 (TechnicalUser) (OP) 28 Nov 11 10:48 I have installed the console on my Windows 7 64 bit Toshiba lap top,when trying to open the program I get the error messageEA04301 unable to open Lan port.The pc is showing me connected to an unidentified network.I have tried disabling my firewall, but to no avail, does anyone have any ideas. RE: Panasonic Manintenance console AGComms (Programmer) 30 Nov 11 19:00 set your unidentified network to a home network.this is a common issue with win 7. RE: Panasonic Manintenance console factor21 (TechnicalUser) (OP) 1 Dec 11 05:01 I have set the network to a work network but the same problem. Any other thoughts RE: Panasonic Manintenance console obtsystems (Programmer) 1 Dec 11 15:27 have you set fixed ip on laptop, if you are connecting direct to system RE: Panasonic Manintenance console AGComms (Programmer) 2 Dec 11 05:56 Another point to Note,If you have installed the latest programming tool,the is sometimes an issue with the latest toolconnecting to systems with ver 3 or lower onKXTDA with CTI Cards. I dont know what modelyou are connecting to but try upgrading tothe latest MPR file.This issue happens with the LAN Port as decribedby you and also with connecting through ISDN.