Hi guys,

I am trying to use the Federated Live Migration tool to migrate LUNs from a DMX-4 to a VMX-2.
The host is running AIX and Solution Enabler, and when I try to create the FLM session here is what I get:

# cat FLM_pairs.txt
symdev=000292600092:06D5 symdev=000290104960:0807
symdev=000292600092:06D6 symdev=000290104960:0808
symdev=000292600092:06D7 symdev=000290104960:0809
symdev=000292600092:06D8 symdev=000290104960:080A

# symrcopy -f  FLM_pairs.txt create -pull -migrate -host_type AIX -name flm -v

Execute 'Create' operation for the 4 specified devices
in device file 'FLM_pairs.txt' (y/[n]) ? y

'Create' operation execution is in progress for the device list
in device file 'FLM_pairs.txt'. Please wait...


STARTING a REMOTE Copy CREATE (PULL) (HOT) (NODIFFERENTIAL) (NOCOPY) (DONOR UPDATE) (MIGRATE) (HOST_TYPE=AIX) (HBA_TYPE=N/A) (MP_TYPE=N/A)

SELECTING Control device - Remote devices:

  (Ctl)Sym: 000292600092 Device: 006D5 -   LUN WWN: 60060480000290104960533030383037 - [SELECTED]
  (Ctl)Sym: 000292600092 Device: 006D6 -   LUN WWN: 60060480000290104960533030383038 - [SELECTED]
  (Ctl)Sym: 000292600092 Device: 006D7 -   LUN WWN: 60060480000290104960533030383039 - [SELECTED]
  (Ctl)Sym: 000292600092 Device: 006D8 -   LUN WWN: 60060480000290104960533030383041 - [SELECTED]


STARTING a RCOPY 'CREATE' operation.


  (Ctl)Sym: 000292600092 Device: 006D5 -   LUN WWN: 60060480000290104960533030383037 - [loc_dir:07E, rem_num:0, rem_sts:0x25SANCOPY_DEV_FLM_NOT_SUPPORTED ]
  (Ctl)Sym: 000292600092 Device: 006D5 -   LUN WWN: 60060480000290104960533030383037 - [SYMAPI_C_RCOPY_DISCOVER_ERROR]

Note: the DMX-4 LUNs are displayed when I do a :
"powermt display dev=all", so I guess AIX can communicate with the DMX-4. And since the WWWNs of the donor are found, some communication is working at some point too.

When I try FLM through the SMC GUI (hosted on a windows server), it cannot discover the LUNs on my DMX-4.

Any help is welcome since I cannot find anything on Internet on this subject.

Thanks in advance.
 

A little update. Using the GUI I finally get the same error as the CLI. The FLM wizard goes to the Summary task,and then failed with the same error as the CLI.