CDEMitel (TechnicalUser) (OP)
16 Dec 10 6:21
I am having trouble trying to pin point the issues experienced using call forwarding.
We are running a Mitel 3300 MXe II controller (version 4.2) with the majority of users as Hot Desk accounts, all our ingress/egress trunks are running SIP (we do not use E1/T1 PRI connections). The user has set their extension to forward all calls to their mobile (Call Forward Always), he is currently away on business in Malaysia.
The issue experienced is when an external caller dials his DDI extension the call should be forward to his mobile, unfortunately what happens is there is a 10 seconds delay in silence it rings once (on his mobile) and the call is pushed to our auto attendant greeting (if calls not answered it should push to his personal voicemail).
I have checked the users COS, COR along with the interconnect timer which all seems connect.
I have tested call forwarding from my extension to my mobile (Both in the UK) and dialling from an external source which works without issue and allows more than one ring for me to answer and if I don't answer the call will be redirected to my voicemail (this is expected).
I have run CCS traces to try and find the path the call will take before being diverted to the auto attendant, but the only difference in comparison to the traces captured when forwarding to my mobile is the following line:
09:57:12 ROL DPN PEER <Primary SIP Trunk> 251 C SSRM_C <Forwarded Mobile Number>
My question is, is there any other traces I can perform to find any errors in the path the call takes before it is bounced to the auto attendant?
Any tips or troubleshooting suggestions are welcome.