Smart questions
Smart answers
Smart people
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login




Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Jobs from Indeed

Link To This Forum!

Partner Button
Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

mindamartine (TechnicalUser) (OP)
15 Nov 10 23:39
Cabinet keeps going down for last 3 weeks off and on. Finally been able to capture info shortly after it goes down (usually by the time I get an alarm and get in the switch all I see are the RSIG link codes_history has already been written over). I have replaced controllers, network cards, had fiber checked, had UPS checked...

As you can see I got in remotely (everything was up) at 7:39pm and shortly after 8pm down it went.

The XPECs both show enabled and the loop is up. There is hardly any traffic at this time of night. It is a federal building and only 2 guards are there.

Any suggestions?
Thanks!


% TTY #01 LOGGED OUT 15:44  15/11/2010
% SESSION DURATION:  00:05
%
% DTC001
%
% TIM719 16:00  15/11/2010 CPU 0
%
% DTC001
%
%  TFS401 37 24 22  4 0 12 5 10
% XMI000 40 : Msg from shelf 0: XPEC error #0001
%
% DTC001
%
% DTC001
%
% DTC001
%
% TIM719 17:00  15/11/2010 CPU 0
%
% DTC001
%
% DTC001
%
% XMI000 40 : Msg from shelf 0: XPEC error #0001
%
% DTC001
%
% DTC001
%
% TIM719 18:00  15/11/2010 CPU 0
%
% DTC001
%
% DTC001
%
% DTC001
%
% DTC001
%
% TIM719 19:00  15/11/2010 CPU 0
%
% DTC001
%
% DTC001
%
% DTC001
%
% TTY #02 LOGGED IN 19:39  15/11/2010
%
% TTY #02 LD 032 19:39 16  15/11/2010
%
% TTY #02 LOGGED OUT 19:39  15/11/2010
% SESSION DURATION:  00:00
%
% DTC001
%
% TIM719 20:00  15/11/2010 CPU 0
%
% DTC001
%
% DTC001
%
% DTC001
%
% DTC001
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 52 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 52 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 52 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 52 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 52 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 52 : RSIG link lost on Port #0 - Reinitialized
%
% XMI001 52  0 8  XMLC
%
% XMI002 52  0 8  XMLC
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% TIM719 21:00  15/11/2010 CPU 0
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
%
% XMI000 40 : RSIG link lost on Port #0 - Reinitialized
johnpoole (Programmer)
16 Nov 10 7:37
one end of the link is dropping.. could be either card or the fiber itself.  

john poole
bellsouth business
columbia,sc

mindamartine (TechnicalUser) (OP)
16 Nov 10 8:18
What do you mean by either card? We have replaced BOTH controllers and it is still the same. Rolled Network cards, still the same. The fiber people say the fiber is good.
Triton101 (MIS)
16 Nov 10 8:42
log into the MMI of the fiber unit and check it for errors.

also,  see if there is an issue with the power for the fiber boxes.

We had to replace the Fiber Multi IPE housing once (the metal box), there was a problem with the board inside, since you replace the card, it might be the box itself maybe......

 

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close