Smart questions
Smart answers
Smart people
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login
Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

LINK TO THIS FORUM!

Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

Tek-Tips LinkedIn® Group

Partner With Us!

"Best Of Breed" Forums Add Stickiness To Your Site
Partner Button
(Download This Button Today!)

Feedback

"...your web site's great! I've been using this system for almost a year now and find it really, really helpful. The people have been helpful in answering just about any question you post in the forums..."
More...

Geography

Where in the world do Tek-Tips members come from?
Click Here To Find Out!

Tek-Tips Shirts!

Get Tek-Tips Swag
Get your
Tek-Tips Forums
SWAG here!
Home > Forums > Wiring Closet > Phone Systems > Avaya: Modular Messaging Forum

Call Me feature won't go to Cell phone in MM

thread1496-1624420
Read More Threads Like This One
S8700Girl (TechnicalUser)
18 Oct 10 23:36
The call me feature will not go to a cell phone that I programmed in Modular Messaging 5.2.  I have tried it with the 9, without the 9, it comes up user not found or unknown error.  I do not know what else to check.  Any ideas?
pabxdude (IS/IT--Management)
19 Oct 10 6:10
what type of integration? are you using SES or Session Manager? If so, ensure that the dial plans in these are configured to allow these numbers to be dialed.

have you been able to verify that call me can reach internal numbers.

Are you able to verify trunk to trunk transfers are enabled in CM?
S8700Girl (TechnicalUser)
19 Oct 10 8:10
This is using SES.  Avaya is the integration.  Trunk to trunk transfers are enabled in CM.  How does it have to be configured to allow them to dial?
phoneguy55 (Programmer)
19 Oct 10 10:50
Try sending the call to an internal extension first.  Then you'll know if the feature even works.   
KenMeans (Vendor)
19 Oct 10 17:02
Does this work on any other number?

Ken Means

www.tel-is.com
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

FLJOE (MIS)
28 Oct 10 15:11
I've got this same issue and setup.  Call me does work to internal extensions, just not to anything external.  Running 5.2.1 via SES integration..

Any ideas?

Thanks:
Joe
KenMeans (Vendor)
28 Oct 10 16:05
if it works to an inside ext number but not to any outside then it must be a SES or PBX issue and on the MM side.

Ken Means

www.tel-is.com
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

FLJOE (MIS)
28 Oct 10 16:50
Thanks.  I think it is SES for sure,  the CM side did have a bad COR on the trunk group restricting outound dialing that I updated and the issue persists.  I'll check the SES and follow up.

thanks:
Joe
 
FLJOE (MIS)
29 Oct 10 16:53
This ended up being a dial pattern issue in the system manager that was causing the sytem to only send 4 of the digits.  I added in a dial pattern in the system manager that stats to include all digits for anything that starts with a 9 and the issue was resolved.

 
Read More Threads Like This One

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Back To Avaya: Modular Messaging

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close